- Stock: 7
- Model: Base-Lisa-Rugosa-22x22
Type:
220x220mm Double textured
220x220mm Textured/smooth
235x235mm Double textured
235x235mm Textured/smooth
330x330mm Double textured
330x330mm Textured/smooth
410x410mm Double textured
500x500mm Double textured
220 × 220 mm PEI Flexible Sheet with One Smooth and One Textured Side
Flexible steel sheet coated with PEI on both sides: one surface is smooth and the other textured. Choose the finish that best suits the filament and the desired print result.
- Nominal size: 220 × 220 mm.
- Base: flexible spring steel.
- Surfaces: one smooth and one textured side.
- Specified steel thickness: approximately 0.4 mm.
- Use: compatible magnetic bed.
Check that your printer uses a magnetic base and accepts a 220 × 220 mm sheet. The base must remain clean and flat and clear the sensors, frame and toolhead.
Set the first layer carefully to avoid excessive adhesion. Let the sheet cool, preferably below 30 °C, and flex it gently to remove the part.
For texture on both sides, see the 220 × 220 mm textured version. For 235 × 235 mm, see the version with one smooth and one textured side.
