- Stock: 7
- Model: Base-rugosa-33x33
Type:
220x220mm Double textured
220x220mm Textured/smooth
235x235mm Double textured
235x235mm Textured/smooth
330x330mm Double textured
330x330mm Textured/smooth
410x410mm Double textured
500x500mm Double textured
330 × 330 mm Double-Sided Textured PEI Flexible Sheet
Flexible steel sheet with textured PEI on both sides for 3D printers using a compatible 330 × 330 mm magnetic base. Parts can be removed by gently flexing the sheet after it has cooled.
- Nominal size: 330 × 330 mm.
- Base: flexible spring steel.
- Surface: textured PEI on both sides.
- Specified steel thickness: approximately 0.4 mm.
- Use: compatible magnetic bed.
Due to its size, check full support, flatness and clearance from the frame, sensors, clips and toolhead movement. Do not choose it only because the dimensions seem similar.
Set the first layer carefully, keep the surface clean and wait until the sheet reaches room temperature, preferably below 30 °C, before removing parts.
For smaller sizes, see the 220 × 220 mm version or the 235 × 235 mm version.
