- Stock: Out of Stock
- Model: Base-rugosa-23.5x23.5
Type:
220x220mm Double textured
220x220mm Textured/smooth
235x235mm Double textured
235x235mm Textured/smooth
330x330mm Double textured
330x330mm Textured/smooth
410x410mm Double textured
500x500mm Double textured
235 × 235 mm Double-Sided Textured PEI Flexible Sheet
Flexible steel sheet with textured PEI on both sides for a compatible 235 × 235 mm magnetic bed. Flexing the cooled sheet helps remove printed parts.
- Nominal size: 235 × 235 mm.
- Base: flexible spring steel.
- Surface: textured PEI on both sides.
- Specified steel thickness: approximately 0.4 mm.
- Use: compatible magnetic bed.
Check the usable dimensions, full support and clearance from the frame, sensors and toolhead. Nominal size alone does not confirm compatibility.
Set the first layer carefully, keep the surface clean and wait until the sheet cools, preferably below 30 °C, before flexing it to remove the part.
For the same size with one smooth and one textured side, see the 235 × 235 mm smooth/textured version. The 220 × 220 mm textured version is also available.
