Only a few units in stock
-11 %
241 × 254 mm Flexible Steel Sheet with PEI on Both Sides
45.00€
39.99€
Ex Tax: 33.05€
- Stock: 6
- Model: Energetic-base-241x254
Model:
220x220mm
235x235mm
241x254mm
250x250mm
300x300mm
330x330mm
350x350mm
241 × 254 mm Flexible Steel Sheet with PEI on Both Sides
Flexible spring-steel sheet with PEI/Ultem coating on both sides, designed for magnetic beds with a nominal 241 × 254 mm surface. Flexing the steel after cooling helps remove printed parts.
- Nominal size: 241 × 254 mm.
- Base material: flexible spring steel.
- Surface: PEI/Ultem on both sides.
- Use: 3D-printer beds with a compatible magnetic base.
Check both dimensions and the sheet position in your printer. A similar area is not enough: the sheet must remain supported without interfering with the toolhead or frame.
Adhesion depends on cleaning, levelling, temperature and material. Let the bed cool before flexing the sheet.
See also the 220 × 220 mm, 300 × 300 mm and 350 × 350 mm versions.
