Only a few units in stock
-18 %
Stock: In Stock
Model: BTT-CB1
The BIGTREETECH CB1 V2.2 with 1 GB RAM is a compact computer module designed to run Linux and act as a host for Klipper, Moonraker and Mainsail on compatible carrier boards. It combines a quad-core 1.5 GHz Allwinner H616 Cortex-A53 processor with 2.4 GHz Wi-Fi and provides the signals required for a..
36.75€ 29.99€
Ex Tax:24.79€
-20 %
Out of Stock
Stock: Out of Stock
Model: Manta-4MP
The BIGTREETECH Manta M4P combines a printer controller and a CM4-form-factor computer-module socket on one board. Its four X, Y, Z and E0 driver sockets make it a compact choice for single-extruder machines, Klipper projects and upgrades where fewer connections between host computer and motion elec..
69.99€ 55.99€
Ex Tax:46.27€
Only a few units in stock
-22 %
Stock: In Stock
Model: Manta-8MP
The BIGTREETECH Manta M8P V1.1 is a 32-bit controller for advanced 3D printers, CoreXY machines and projects requiring several independent motors. It combines a 64 MHz STM32G0B1VET6 Cortex-M0+, eight replaceable driver sockets and a BTB connector for mounting a compatible Linux module directly on th..
89.99€ 69.99€
Ex Tax:57.84€
Only a few units in stock
-11 %
Stock: In Stock
Model: SKR 3
The BIGTREETECH SKR 3 is a 32-bit controller board for custom 3D printers and upgrades requiring five removable driver sockets, two hotend outputs, a heated-bed output, controlled fans, displays, sensors and USB or CAN communication.
The board pictured in HTA3D's current gallery carries an STM32H72..
84.26€ 74.99€
Ex Tax:61.98€
-10 %
Out of Stock
Stock: Out of Stock
Model: SKR-Pico
The BIGTREETECH SKR Pico is a compact 85 × 56 mm controller for Voron V0 printers and other projects requiring four independently controlled motors. It integrates an RP2040 microcontroller and four UART-controlled TMC2209 drivers and connects to a computer running Klipper over USB-C or a suitably co..
27.75€ 24.85€
Ex Tax:20.54€
Only a few units in stock
-7 %
Stock: In Stock
Model: TMC5160Tplus-BTT
The BIGTREETECH TMC5160T Plus V1.0 is an external high-power driver for two-phase bipolar stepper motors. It combines a TMC5160-TA controller with eight external MOSFETs, a dedicated power terminal, heatsink enclosure and SPI connectivity, providing substantially more headroom than a conventional pl..
49.90€ 46.20€
Ex Tax:38.18€
-29 %
Stock: In Stock
Model: PiezasImpresas-EjeX-3DSteel
A set of black PETG printed parts for building or repairing the HTA3D 3DSteel X axis. The base set contains both X ends and the sliding belt tensioner; the X carriage and fasteners are available as separate options.
These parts work together with the rods, bearings, Z lead screws, motor and trans..
12.00€ 8.50€
Ex Tax:7.02€
-27 %
Stock: In Stock
Model: V6Dual-Disipador
Dual aluminium heatsink for building a Chimera-style dual-extrusion toolhead with two independent hotend assemblies. It supports two filament paths and allows each hot zone to operate at a different temperature when completed with suitable components and electronics.
The body measures approximate..
8.25€ 5.99€
Ex Tax:4.95€
-20 %
Stock: In Stock
Model: V6Dual-Full
This Chimera-style dual hotend is designed for Bowden extrusion systems using 1.75 mm filament. It features two independently heated nozzles, allowing dual-color printing, multi-material printing or the use of soluble support materials with different extrusion temperatures.
Features
Dual..
25.00€ 19.99€
Ex Tax:16.52€
Recommended
-30 %
Out of Stock
Stock: Out of Stock
Model: Mega 2560 R3 (Compatible) 16u2
The Compatible Arduino Mega 2560 R3 with ATmega16U2 is a development board based on the ATmega2560 microcontroller, designed for projects requiring a large number of input and output connections. This version features the ATmega16U2 USB interface, the same USB chip used on the original Arduino Mega,..
24.99€ 17.45€
Ex Tax:14.42€
-29 %
Out of Stock
Stock: Out of Stock
Model: MegaCompatible
The Compatible Arduino Mega 2560 R3 is a development board based on the ATmega2560 microcontroller, designed for projects requiring a large number of input and output connections. It is widely used in robotics, automation, electronics and 3D printing thanks to its expandability and compatibility wit..
17.99€ 12.75€
Ex Tax:10.54€
Recommended
FLASH
-49 %
Stock: In Stock
Model: HotendV6-HQ
Compact V6 hotend for 1.75 mm filament, configured and assembled by HTA3D with your selected components. Choose the heatbreak, heater block, nozzle, heater cartridge, thermistor connector and PTFE length to suit the material, power system and printer installation.
This is not a fixed configuratio..
39.00€ 19.99€
Ex Tax:16.52€