6010 24V 11-Blade Axial Fan with XH2.54 Connector

6010 24V axial fan with an 11-blade impeller, a 2-pin XH2.54 connector and an approximately 20 cm cable. Its nominal 60 × 60 × 10 mm dimensions provide broad airflow while maintaining a slim profile.

It is suitable for cooling electronics, controller boards, power supplies and small enclosures used in 3D printers or CNC machines.

Key features

• Type: brushless axial fan.
• Nominal format: 6010.
• Dimensions: 60 × 60 × 10 mm.
• Rated voltage: 24V DC.
• Rated current: 0.16A ±10%.
• Rated speed: 2600 RPM ±10%.
• Rated airflow: 21.5 CFM.
• Rated noise level: 18 dBA ±10%.
• 11-blade impeller.
• 2-pin XH2.54 connector.
• Approximate cable length: 20 cm.
• Approximate weight: 26 g.

Applications

• Cooling controller boards and electronics.
• Power-supply ventilation.
• Air circulation in small enclosures.
• 3D printers, CNC machines and automation.

Compatibility

It can replace another 6010 24V axial fan when the dimensions, mounting pattern, connector, polarity and available space all match.

Its 10 mm thickness makes it suitable for narrow brackets but also limits impeller depth. Where airflow must pass through a restrictive grille, filter or heatsink, a thicker fan may be more appropriate if sufficient space is available.

For 5V equipment, see the GDSTIME 6010 5V axial fan. Both versions share nominal dimensions but are not electrically compatible.

Installation

Confirm that the output supplies 24V and check the polarity of the XH2.54 connector. The output must support the fan's operating and starting current.

When using PWM control, configure a minimum setting that allows reliable startup and check that the airflow direction matches the intended ventilation arrangement.

Package contents

• 1 × 6010 24V axial fan with an approximately 20 cm cable.