-44 %
Stock: In Stock
Model: Hotend-V6-1.75-PT100Termistor
Complete V6 hotend for 1.75 mm filament with an aluminium block, 3 mm encapsulated thermistor, silicone sock and dedicated cooling. It is supplied assembled, with selectable voltage, heatbreak and nozzle diameter to suit the printer and material.
The encapsulated sensor is better protected agains..
35.00€ 19.50€
Ex Tax:16.12€
Stock: In Stock
Model: V6-4.1-Throat
This stainless steel V6 heatbreak features an internal PTFE liner, allowing the PTFE tube to extend down to the top of the nozzle. It is designed for V6-compatible hotends using 1.75 mm filament.
Features
PTFE-lined heatbreak (not all-metal).
Manufactured from stainless steel.
..
1.99€
Ex Tax:1.64€
Stock: In Stock
Model: V6-316L-Throat
This stainless steel all-metal heatbreak is designed for hotends compatible with the V6 standard. Its thin transition section creates an efficient thermal barrier between the heatsink and the heater block, helping maintain stable filament melting while reducing heat transfer to the cold side of the ..
1.99€
Ex Tax:1.64€
Stock: In Stock
Model: Nozzle-1.75 Inox-0.4
Stainless-steel nozzle for 1.75 mm filament, with a nominal 0.4 mm outlet and short V6-style geometry. This is a versatile size for common print profiles and an alternative to brass where stainless steel is preferred.
Technical specifications
MaterialStainless steel..
0.60€
Ex Tax:0.50€
Stock: In Stock
Model: Nozzle-1.75 Inox-0.6
Stainless-steel nozzle for 1.75 mm filament, with a nominal 0.6 mm outlet and short V6-style geometry. It supports wider lines and thicker layers than a 0.4 mm nozzle, reducing the number of passes on large parts when the hotend and extruder can supply the required flow.
Technical speci..
0.60€
Ex Tax:0.50€
Stock: In Stock
Model: Bimetal-M6-M7
Bimetal all-metal heatbreak for V6-style hotends, with an M6 × 1 thread for the heater block and an M7 × 1 thread for the heatsink. It is designed for 1.75mm filament.
It combines a titanium section that limits heat transfer towards the cold zone with a copper section that conducts residual heat ..
3.50€
Ex Tax:2.89€
Stock: In Stock
Model: FCMMini-XH2.54-Vertical
Mini mechanical endstop with vertical connector, metal lever, LED indicator and an approximately 1 m cable. Its perpendicular cable exit can simplify wiring where there is little clearance beside the PCB edge.
Features and dimensions
Lever-operated mechanical microswitch.
XH2.54..
0.99€
Ex Tax:0.82€
Stock: In Stock
Model: Heater-Block-Vol
Aluminum-alloy heater block for Volcano-format hotends. It is designed to accommodate temperature sensors with a 3 mm cylindrical encapsulation and use M6-threaded Volcano nozzles.
Features
Format: Volcano.
Material: aluminum alloy.
Nozzle thread: M6.
Housing for 3 mm encapsulated temperatu..
1.90€
Ex Tax:1.57€
-24 %
Stock: In Stock
Model: Stealthburner
A printed-parts kit for Voron Stealthburner Beta with the Clockwork 2 extruder, prepared with the selected material, colours and hotend cartridge. It is intended for building or repairing this historical revision of the Voron toolhead without printing its main components yourself.
Stealthburner i..
25.00€ 19.00€
Ex Tax:15.70€
Stock: In Stock
Model: L3K-Extrusor
The Wade-L3K is a geared direct extruder based on the Greg's Wade architecture and developed for Prusa i3 printers and RepRap projects. A NEMA 17 motor drives a 10-tooth pinion meshing with a 43-tooth gear, providing a nominal 4.3:1 reduction.
Filament is driven by an M8 hobbed bolt and pressed a..
13.49€
Ex Tax:11.15€
Stock: In Stock
Model: CorreaGT2- reforzada-10mm
10 mm GT2 timing belt with a wear-resistant coating, manufactured from neoprene and internally reinforced with fiberglass.
It is intended for transmissions specifically designed for 10 mm belts. The coating on its toothed surface helps limit surface wear caused by repeated contact with the pulley..
2.85€
Ex Tax:2.36€
Stock: In Stock
Model: Correa GT2 - reforzada
6 mm GT2 timing belt with a wear-resistant coating, manufactured from neoprene and internally reinforced with fiberglass.
The coating applied to the toothed surface is intended to reduce surface wear caused by repeated contact with the pulleys. It can be a useful upgrade for basic 3D printers or ..
1.99€
Ex Tax:1.64€