Only a few units in stock
-16 %
Stock: In Stock
Model: 2510-24V
The GDSTIME 2510 24 V is a compact 25 × 25 × 10 mm brushless axial fan for cooling hotends, small electronics enclosures, stepper drivers and other assemblies where installation space is limited. It has two wires, an approximately 15 cm cable and a white two-pin connector.
The photographed unit i..
3.20€ 2.70€
Ex Tax:2.23€
Stock: In Stock
Model: 3007-5V
GDSTIME 3007 5V axial fan with compact 30 × 30 × 7 mm dimensions, a sleeve bearing and a 15 cm cable. It is intended for cooling small electronic devices and mechanisms where there is insufficient space for a 10 mm thick fan.
Unlike a centrifugal blower, this fan moves air along its axis. It is s..
2.20€
Ex Tax:1.82€
Stock: In Stock
Model: 3010-BallBearing-Fan-12V-1m
GDSTIME 3010 12V axial fan with dual ball bearings and a 1 metre cable. Its 30 × 30 × 10 mm format provides direct cooling for hotends, small heatsinks and compact electronic equipment.
The dual ball bearing system is particularly suitable for extended operation, higher temperatures or mounting p..
5.40€
Ex Tax:4.46€
FLASH
-29 %
Stock: In Stock
Model: 3010-24v-1m
GDSTIME 3010 24V axial fan with a 1 metre power cable. Its compact 30 × 30 × 10 mm format is suitable for cooling hotends, small heatsinks, electronics and other components where space is limited.
The long cable simplifies installation in 3D printers and machines where the controller board is loc..
3.50€ 2.50€
Ex Tax:2.07€
Stock: In Stock
Model: 3010-BallBearing-Fan-24V-1m
GDSTIME 3010 24V axial fan with a ball bearing system and a 1 metre power cable. Its 30 × 30 × 10 mm dimensions make it suitable for cooling hotends, small heatsinks and electronics in equipment with limited space.
The ball bearing system is intended for frequent or extended operation, particular..
5.50€
Ex Tax:4.55€
Stock: In Stock
Model: 4010-BallBearing-24V-1m
GDSTIME 4010 24V axial fan with a ball bearing system and a 1 metre power cable. Its 40 × 40 × 10 mm format provides direct airflow for cooling hotends, heatsinks and electronic components.
The ball bearing system is particularly suitable for equipment subject to extended operation, higher workin..
5.25€
Ex Tax:4.34€
-32 %
Stock: In Stock
Model: 4020-12V
Designed for active cooling in 3D printers, electronic equipment and automation systems, this GDSTIME 40 × 40 × 20 mm axial fan operates from a 12 V DC supply and provides a balanced combination of airflow, low noise and long service life. It is suitable for cooling control boards, heatsinks, enclos..
4.75€ 3.25€
Ex Tax:2.69€
Stock: In Stock
Model: 6010-12V
Designed for active cooling in 3D printers, electronic equipment and automation systems, this GDSTIME 40 × 40 × 20 mm axial fan operates from a 24 V DC supply and delivers an effective balance of airflow, low noise and long service life. It is suitable for cooling controller boards, heatsinks, enclo..
1.99€
Ex Tax:1.64€
-17 %
Stock: In Stock
Model: 6010-5V
GDSTIME 6010 5V axial fan with an 11-blade impeller, a 2-pin XH2.54 connector and an approximately 20 to 25 cm cable. Its 60 × 60 × 10 mm format provides direct cooling while maintaining a slim profile.
It is suitable for electronic boards, single-board computers, small enclosures and other 5V de..
5.45€ 4.50€
Ex Tax:3.72€
Stock: In Stock
Model: 6015-12V
GDSTIME 6015 12V axial fan with a hydraulic bearing, a 9-blade impeller, a 2-pin XH2.54 connector and a 25 cm cable. Its 60 × 60 × 15 mm format provides a balance between thickness, airflow and performance against moderate restrictions.
The hydraulic bearing is intended to provide smooth operatio..
2.20€
Ex Tax:1.82€
Stock: In Stock
Model: 6020Hidralico-12V
GDSTIME 6020 12V axial fan with a hydraulic bearing, a 2-pin XH2.54 connector and an approximately 25 cm cable. Its nominal 60 × 60 × 20 mm dimensions provide direct airflow for cooling electronics, power supplies, heatsinks and machine enclosures.
The hydraulic bearing provides smooth operation ..
2.22€
Ex Tax:1.83€
-28 %
Stock: In Stock
Model: 6020-RodBolas-24V
GDSTIME 6020 24V axial fan with dual ball bearings, a 2-pin XH2.54 connector and an approximately 25 cm cable. Its nominal 60 × 60 × 20 mm dimensions provide direct airflow for cooling electronics, power supplies, heatsinks and machine enclosures.
The dual ball bearing system is particularly suit..
8.50€ 6.10€
Ex Tax:5.04€