GDSTIME 4010 24V Ball Bearing Axial Fan with 1 m Cable

GDSTIME 4010 24V axial fan with a ball bearing system and a 1 metre power cable. Its 40 × 40 × 10 mm format provides direct airflow for cooling hotends, heatsinks and electronic components.

The ball bearing system is particularly suitable for equipment subject to extended operation, higher working temperatures or mounting positions where reduced wear is preferred over a basic fan.

Key features

• Brand: GDSTIME.
• Type: brushless axial fan.
• Nominal format: 4010.
• Dimensions: 40 × 40 × 10 mm.
• Rated voltage: 24V DC.
• Rated current: 0.04A ±10%.
• Rated speed: 9500 RPM.
• Rated airflow: 8.29 CFM.
• Rated noise level: 25.8 dBA.
• Ball bearing system.
• Two-wire connection.
• Approximate cable length: 1 m.
• Approximate weight: 15 g.

Applications

• Hotend heatsink cooling.
• Cooling electronics and drivers.
• Frequently or continuously operated equipment.
• 3D printers, CNC machines and automation.

Compatibility

It can be used as a replacement or upgrade in many systems designed for 4010 24V axial fans. Mounting-hole pattern, available space, connector, polarity and airflow direction must all be checked before installation.

Its speed and airflow are higher than those of some standard 4010 fans. This may improve cooling but can also alter noise and the thermal behaviour of the machine. It should not be treated as a universal upgrade without considering the equipment requirements.

For less demanding applications, see the standard 4010 24V axial fan with a 1 metre cable.

Installation and speed control

Confirm that the output supplies 24V and supports the fan's operating and starting current. Check the polarity before connection even if the connector fits physically.

When using PWM control, configure a minimum setting that guarantees reliable startup. When cooling a hotend heatsink, prioritise stable operation to reduce the risk of heat travelling towards the filament.

Package contents

• 1 × GDSTIME 4010 24V ball bearing axial fan with 1 m cable.