GDSTIME 6015 12V Hydraulic Bearing Axial Fan with 25 cm Cable

GDSTIME 6015 12V axial fan with a hydraulic bearing, a 9-blade impeller, a 2-pin XH2.54 connector and a 25 cm cable. Its 60 × 60 × 15 mm format provides a balance between thickness, airflow and performance against moderate restrictions.

The hydraulic bearing is intended to provide smooth operation and reduced wear in continuous cooling applications with suitable ventilation.

Key features

• Brand: GDSTIME.
• Model: GDA6015.
• Type: brushless axial fan.
• Nominal format: 6015.
• Dimensions: 60 × 60 × 15 mm.
• Rated voltage: 12V DC.
• Rated current: 0.16A ±10%.
• Rated speed: 4500 RPM ±10%.
• Rated airflow: 24.8 CFM.
• Rated pressure: 0.13 inH2O.
• Rated noise level: 32.4 dBA ±10%.
• Hydraulic bearing.
• 9-blade impeller.
• 2-pin XH2.54 connector.
• Approximate cable length: 25 cm.
• Approximate weight: 35 g.

Applications

• Cooling electronics and controller boards.
• Power-supply ventilation.
• 3D-printer and small-machine enclosures.
• Robotics and automation systems.

Compatibility

It can be installed in equipment designed for 6015 12V axial fans when the dimensions, mounting pattern, connector, polarity and current capacity all match.

Do not connect this fan directly to a 24V output. For a 24V machine, use the standard 6015 24V axial fan or the 6015 24V ball bearing fan.

All three versions share nominal dimensions but have different voltages, speeds, bearing systems and operating characteristics.

Installation

Check the 12V supply, connector polarity and output capacity before operation.

When using PWM control, verify reliable startup at the configured minimum setting. The optimum speed depends on temperature, airflow restriction and acceptable noise level.

Package contents

• 1 × GDSTIME 6015 12V hydraulic-bearing axial fan with 25 cm cable.