GDSTIME 6020 12V Hydraulic Bearing Axial Fan with 25 cm Cable

GDSTIME 6020 12V axial fan with a hydraulic bearing, a 2-pin XH2.54 connector and an approximately 25 cm cable. Its nominal 60 × 60 × 20 mm dimensions provide direct airflow for cooling electronics, power supplies, heatsinks and machine enclosures.

The hydraulic bearing provides smooth operation and is suitable for continuous cooling systems requiring a balance between airflow, noise and durability.

Key features

• Brand: GDSTIME.
• Model: GDA6020.
• Type: brushless axial fan.
• Nominal format: 6020.
• Dimensions: 60 × 60 × 20 mm.
• Rated voltage: 12V DC.
• Rated current: 0.16A ±10%.
• Rated speed: 4500 RPM.
• Rated airflow: 26.2 CFM.
• Rated noise level: 34.3 dBA ±10%.
• Hydraulic bearing.
• 2-pin XH2.54 connector.
• Approximate cable length: 25 cm.
• Approximate weight: 48 g.

Applications

• Cooling electronic boards and controllers.
• Power-supply and heatsink ventilation.
• Air circulation in 3D-printer enclosures.
• CNC machines, robotics and automation.
• Electronic projects using a 12V supply.

Compatibility

It can be installed in equipment designed for 6020 12V axial fans when the dimensions, mounting-hole pattern, available space, connector, polarity and output current capacity all match.

The 6020 format defines nominal dimensions of 60 × 60 × 20 mm. It is not a direct dimensional replacement for a 6010 or 6015 fan where the bracket does not accommodate a 20 mm thickness. It must not be confused with a centrifugal blower, which has a different housing and outlet direction.

Do not connect this fan directly to a 24V output. For equipment operating at that voltage, use the GDSTIME 6020 24V hydraulic-bearing axial fan or, for particularly demanding applications, the 24V dual ball bearing version.

Bearing selection

The hydraulic version is suitable for many general-purpose and continuous-cooling applications. Selection over a ball bearing version should consider operating hours, temperature, mounting orientation, noise and the actual requirements of the machine.

Neither version should be treated as universally better. A different bearing system or higher speed may provide advantages under certain conditions but can also alter noise, consumption and air movement inside the equipment.

Installation and speed control

Confirm that the output supplies 12V and can provide the required operating and starting current. Check the polarity of the XH2.54 connector even if it fits the existing socket physically.

When using PWM control, configure a minimum setting that allows the rotor to start consistently. After installation, check the airflow direction and ensure that no cable can contact the blades.

Package contents

• 1 × GDSTIME 6020 12V hydraulic-bearing axial fan with an approximately 25 cm cable.