Stock: In Stock
Model: Eco Turbo Fan Pipe
The BIQU Eco Turbo Fan Pipe is the flexible duct designed to carry air from the Eco Turbo Kit V1.0 to the part-cooling system installed on the toolhead. It allows the blower to remain off the carriage so that its weight does not move with the printer axes.
Its nominal 1.8 m length provides routin..
8.95€
Ex Tax:7.40€
Stock: In Stock
Model: Eco Turbo Kit
The BIQU Eco Turbo Kit V1.0 is a remote part-cooling system for 3D printers. It combines a Nidec brushless centrifugal blower with a BIGTREETECH controller board and transports air to the toolhead through a flexible hose.
Moving the blower away from the toolhead can reduce moving mass compared wi..
39.99€
Ex Tax:33.05€
Stock: In Stock
Model: BFB0712HF
Delta BFB0712HF 12 V centrifugal blower, the model used by the original regular or 300 Nevermore StealthMax project. Its compact, approximately 65 × 65 mm format provides the static pressure required to move air through the carbon basket and HEPA filters.
This is not the official fan for the ..
3.99€
Ex Tax:3.30€
Stock: In Stock
Model: 1225B-BallBearing-24V
GDSTIME 12025 24V axial fan measuring 120 × 120 × 25 mm and equipped with dual ball bearings. It is designed to provide high airflow in electrical cabinets, electronics enclosures, enclosed 3D printers, CNC machines and other large-format ventilation systems.
This version has a nominal speed of 3..
5.99€
Ex Tax:4.95€
Stock: In Stock
Model: 12025-Hydraulic-24V
GDSTIME 12025 24V axial fan measuring 120 × 120 × 25 mm and equipped with a hydraulic bearing. It provides large-format ventilation with a balance focused on reducing noise and electrical consumption.
Its nominal speed of 2000 RPM and stated airflow of 77 CFM make it suitable for electronics encl..
3.50€
Ex Tax:2.89€
Stock: In Stock
Model: 12032Blower-BallBearing-24V
GDSTIME 12032 24V centrifugal blower fan with dual ball bearings, a 2-pin XH2.54 connector and a 30 cm cable. Its 120 × 120 × 32 mm format provides substantially more airflow than the compact blowers commonly used on print heads.
It is intended for ventilating enclosures, electronics, machines, f..
11.99€
Ex Tax:9.91€
Stock: In Stock
Model: Cable-XH2.54-1m
GDSTIME extension cable designed to add one metre to the connection of a two-wire fan. It has complementary male and female 2-pin XH2.54 connectors, providing a detachable connection without cutting or soldering the fan's original cable.
Main features
Brand: GDSTIME.
Nominal length: 1 m..
0.99€
Ex Tax:0.82€
Stock: In Stock
Model: 12032Blower-Sleeve-24V
Large-format GDSTIME centrifugal blower powered from 24 V and measuring a nominal 120 × 120 × 32 mm. Its airflow and pressure make it suitable for ducts, filtration, electronics cooling and larger-scale local ventilation than the blowers normally fitted around hotends.
Specifications
Brand: GD..
9.59€
Ex Tax:7.93€
Stock: In Stock
Model: 4020Blower-24V
GDSTIME 24 V centrifugal blower in a 4020 format, with a sleeve bearing and an approximately 20 cm cable. Its 20 mm thickness provides static pressure in a compact assembly suitable for nozzles, air ducts and localised cooling.
Specifications
Brand: GDSTIME.
Format: 4020.
Nominal dimensions:..
3.50€
Ex Tax:2.89€
Stock: In Stock
Model: 5015s-24v
GDSTIME 5015-format centrifugal blower powered from 24 V and fitted with a hydraulic bearing system. Its side outlet is designed for air ducts and nozzles, providing localised cooling in 3D printers, electronics and compact equipment.
Specifications
Brand: GDSTIME.
Format: 5015.
Nominal dime..
3.15€
Ex Tax:2.60€
Stock: In Stock
Model: 5020Blower-Sleeve-24V-25cm
GDSTIME 5020-format centrifugal blower powered from 24 V and using a sleeve bearing. Its 20 mm thickness provides more airflow than an equivalent 5015 model when the duct, bracket and available space are designed for this format.
Specifications
Brand: GDSTIME.
Format: 5020.
Nominal dimension..
7.65€
Ex Tax:6.32€
Only a few units in stock
-16 %
Stock: In Stock
Model: 2510-24V
The GDSTIME 2510 24 V is a compact 25 × 25 × 10 mm brushless axial fan for cooling hotends, small electronics enclosures, stepper drivers and other assemblies where installation space is limited. It has two wires, an approximately 15 cm cable and a white two-pin connector.
The photographed unit i..
3.20€ 2.70€
Ex Tax:2.23€