GDSTIME 24 V 5015 Hydraulic Centrifugal Blower Fan

GDSTIME 5015-format centrifugal blower powered from 24 V and fitted with a hydraulic bearing system. Its side outlet is designed for air ducts and nozzles, providing localised cooling in 3D printers, electronics and compact equipment.

Specifications

• Brand: GDSTIME.
• Format: 5015.
• Nominal dimensions: 50 × 50 × 15 mm.
• Nominal voltage: 24 V DC.
• Nominal current: 0.06 A ±10%.
• Approximate electrical power: 1.44 W.
• Hydraulic bearing.
• Declared speed: 4500 RPM ±10%.
• Declared airflow: 3.72 CFM.
• Declared noise level: 32.4 dBA ±10%.
• Cable length: approximately 25 cm.
• Approximate weight: 27 g.
• Two-wire connection.

Applications

• Part cooling.
• Hotend air ducts.
• Localised controller and module cooling.
• Compact 24 V air channels.

Compatibility

It may be used in machines accepting a 24 V 5015 blower with matching geometry, mounting points, outlet orientation and electrical connection.

The 5015 designation describes nominal dimensions but does not guarantee that every housing has an identical outlet, cable position or mounting pattern. Compare the original fan and duct before installation.

12 V alternative

For equipment operating from 12 V, see the 12 V 5015 centrifugal blower with 1 m cable. Do not connect the 12 V version directly to a 24 V supply.

Installation

• Check voltage, polarity and connector.
• Protect splices with suitable insulation and strain relief.
• Keep the air inlet clear.
• Manually check that the impeller rotates without contact.
• Confirm reliable starting when PWM-controlled.

Package contents

• 1 × GDSTIME 24 V 5015 centrifugal blower fan.