Stock: In Stock
Model: Nozzle-Comp-V6 1.75-0.3
Trianglelab brass nozzle for 1.75 mm filament, with a nominal 0.3 mm outlet and an M6 × 1 V6 interface. This CNC-machined standard V6 version combines the good thermal transfer of brass with manufacturing intended to keep the inner path consistent.
It prioritises detail and allows narrower lines ..
2.85€
Ex Tax:2.36€
Stock: In Stock
Model: BSP-PC04-1
The BSP PC4-01 through Bowden connector securely holds 4 mm outer diameter PTFE tubing in compatible hotends, extruders and other components featuring a 1/8" BSP thread. Its through design allows the PTFE tube to pass completely through the fitting when required by the application.
Features
..
0.40€
Ex Tax:0.33€
Stock: In Stock
Model: Boquilla-MK8-0.3
0.3 mm MK8 Brass nozzle designed for printing narrow lines and parts requiring a higher level of detail. It has an M6 × 1 thread and is intended for 1.75 mm filament.
Its 13 mm geometry is commonly used by conventional MK8 hotends. However, an M6 thread alone does not guarantee compatibility: the..
0.45€
Ex Tax:0.37€
Stock: In Stock
Model: Boquilla-MK8-0.4
0.4 mm MK8 Brass nozzle for 1.75 mm filament. This is a balanced size for general-purpose 3D printing, combining good detail with moderate flow requirements and relatively straightforward calibration.
It has an M6 × 1 thread and a nominal overall length of 13 mm. Thread, length, seating geometry ..
0.45€
Ex Tax:0.37€
Stock: In Stock
Model: Boquilla-MK8-0.5
0.5 mm MK8 Brass nozzle for 1.75 mm filament. Its larger outlet can produce wider lines and deposit more material than a 0.4 mm nozzle, making it useful for functional parts and applications where productivity is prioritised.
It has an M6 × 1 thread and a nominal overall length of 13 mm. Compare ..
0.45€
Ex Tax:0.37€
Out of Stock
Stock: Out of Stock
Model: Termistor-104NT-4-XH
Fresa 3D 104NT-4 thermistor with a 145 mm cable and 2-pin XH2.54 connector. It is intended for temperature measurement in hotends and other systems compatible with the 104NT-4 electrical curve.
Features
Sensor type: 104NT-4 NTC thermistor.
Cable length: 145 mm.
Connector: 2-pin XH2.54.
Brand:..
3.35€
Ex Tax:2.77€
Out of Stock
Stock: Out of Stock
Model: Kit-Bloque-Kobra3
Replacement assembly for the hotend fitted to the Anycubic Kobra 3 and Kobra 3 Combo. It is supplied assembled with a heater block, heater cartridge, thermistor, bimetal heatbreak, 0.4 mm Brass nozzle and silicone sock.
It is intended to connect to the original Kobra 3 printhead. It should not be..
12.70€
Ex Tax:10.50€
Out of Stock
Stock: Out of Stock
Model: Nozzle-1.75 hardened steel-0.6
A 0.6 mm Trianglelab V6 nozzle made from hardened A2 tool steel with a declared hardness of HRC 62. Its combination of wear resistance and a larger outlet is particularly useful for 1.75 mm carbon-fibre, glow-in-the-dark, wood-filled, metal-filled and other abrasive filaments.
Compared with 0.4 a..
6.90€
Ex Tax:5.70€
Out of Stock
Stock: Out of Stock
Model: BlockV6-PlatedCopper
V6 Plated Copper heater block designed for temperature sensors with a 3 mm cylindrical encapsulation. It is made from a special high-temperature copper alloy and features a nickel-based coating that protects the surface and reduces plastic adhesion.
Features
Material: high-temperature copper a..
9.75€
Ex Tax:8.06€