Out of Stock
Stock: Out of Stock
Model: Boquilla-Volc-0.4
Description
Brass nozzle with an extended Volcano-type geometry, M6 thread and 0.4 mm outlet. It is designed for hotends using Volcano-style nozzles and 1.75 mm filament.
The 0.4 mm diameter provides a good balance between detail, ease of configuration and printing speed. It is a versatile choice ..
0.85€
Ex Tax:0.70€
Stock: In Stock
Model: Boquilla-Volc-0.5
Description
Brass nozzle with an extended Volcano-type geometry, M6 thread and 0.5 mm outlet. It is intended for Volcano and compatible hotends using 1.75 mm filament.
The 0.5 mm size sits between the standard detail of a 0.4 mm nozzle and the increased flow of a 0.6 mm nozzle. It is useful for fu..
0.85€
Ex Tax:0.70€
Stock: In Stock
Model: Boquilla-Volc-0.6
Description
Brass Volcano-type nozzle with an M6 thread and 0.6 mm outlet, designed for 1.75 mm filament extrusion systems.
The 0.6 mm opening supports wider extrusion lines and thicker layers than a 0.4 mm nozzle. It is a balanced option for reducing print times on medium and large parts, produci..
0.85€
Ex Tax:0.70€
Stock: In Stock
Model: Boquilla-Volc-0.8
Description
Brass Volcano-type nozzle with an M6 thread and 0.8 mm outlet for 1.75 mm filament. It deposits wider extrusion lines and a greater volume of material per layer than general-purpose nozzles.
It is particularly suitable for large parts, rapid prototypes, vase-mode models and functional ..
0.85€
Ex Tax:0.70€
Stock: In Stock
Model: Boquilla-Volc-1
Description
Brass Volcano-type nozzle with an M6 thread and 1.0 mm outlet for 1.75 mm filament systems. It is intended for printing large parts using wide extrusion lines and thicker layers.
The 1.0 mm diameter can produce strong walls and reduce the number of required extrusion paths, although it..
0.85€
Ex Tax:0.70€
Stock: In Stock
Model: Boquilla-Volc-1.2
Description
Brass Volcano-type nozzle with an M6 thread and 1.2 mm outlet for 1.75 mm filament. This is the largest diameter in the family and is intended for large parts, very wide extrusion lines and applications prioritising deposited volume and strength over detail.
It requires a hotend with s..
0.85€
Ex Tax:0.70€
Stock: In Stock
Model: Brass-V6-Heater-Block-PT100
Brass V6 heater block designed for temperature sensors with a 3 mm cylindrical encapsulation. Brass provides greater mechanical strength and higher thermal inertia, helping the hotend maintain a more stable temperature during printing.
Features
Material: brass.
Format: V6.
Nozzle thread: M6...
4.85€
Ex Tax:4.01€
-27 %
Stock: In Stock
Model: V6Dual-Disipador
Dual aluminium heatsink for building a Chimera-style dual-extrusion toolhead with two independent hotend assemblies. It supports two filament paths and allows each hot zone to operate at a different temperature when completed with suitable components and electronics.
The body measures approximate..
8.25€ 5.99€
Ex Tax:4.95€
Stock: In Stock
Model: V6-Heatsink-Compact
Compact aluminium heatsink for building a hotend with V6-style components. It has an M7 × 1 lower heatbreak thread, a 4.2mm internal guide and an integrated pneumatic retention system for PTFE tubing with a 4mm outside diameter.
It can be used in Bowden configurations and in certain direct-drive ..
2.50€
Ex Tax:2.07€
Stock: In Stock
Model: Termistor-104NT-4-GH
Fresa 3D 104NT-4 thermistor with a 100 mm cable and 2-pin GH1.25 connector. It is designed for temperature measurement systems compatible with the 104NT-4 electrical curve and this connection format.
Features
Type: 104NT-4 NTC thermistor.
Cable length: 100 mm.
Connector: 2-pin GH1.25.
Brand: ..
3.35€
Ex Tax:2.77€
Out of Stock
Stock: Out of Stock
Model: Termistor-104NT-4-XH
Fresa 3D 104NT-4 thermistor with a 145 mm cable and 2-pin XH2.54 connector. It is intended for temperature measurement in hotends and other systems compatible with the 104NT-4 electrical curve.
Features
Sensor type: 104NT-4 NTC thermistor.
Cable length: 145 mm.
Connector: 2-pin XH2.54.
Brand:..
3.35€
Ex Tax:2.77€
Out of Stock
Stock: Out of Stock
Model: Kit-Bloque-Kobra3
Replacement assembly for the hotend fitted to the Anycubic Kobra 3 and Kobra 3 Combo. It is supplied assembled with a heater block, heater cartridge, thermistor, bimetal heatbreak, 0.4 mm Brass nozzle and silicone sock.
It is intended to connect to the original Kobra 3 printhead. It should not be..
12.70€
Ex Tax:10.50€