Spares for hotend

Titanium is a material with excellent mechanical and thermal properties, which allows us to offer a throat with the following advantages:Thanks to its excellent machinability and super-precise production process this throat has very tight tolerances.Its interior finish is mirror effect, which favors..

V6 Dual Heatsink compatible with bowden system Features: Compatible with V6 components, such as nozzles and heater block. It can be configured for two different temperatures on each end, so multiple materials can be printed. Easy leveling system for the nozzle. Light and com..

The V6 Heater Block has been upgraded to clamp both the heater cartridge and thermistor in place. These design improvements improve the thermal response of the HotEnd and make thermistor assembly easier.This product also comes with the following fixings:M3x0.5x4 socket dome screw and..

High temperature resistant block that is not easily deformed and has excellent temperature transmissibility. Ideal for high temperature printing.Plated copper components are designed for best performance at high temperatures. Manufactured from a special high temperature copper alloy with a softening..

This version is more compact than the version V5.  The inner diameter is 4.2 mm, which allows to enter a teflon tube down the throat, thereby minimizing friction. Connections: Bottom M7 - Compatible with throats style V6 Top designed to connect to the connector PC04-1..

This version is more compact than the version v5.  The inner diameter is 4.2 mm, which allows to enter a Teflon tube until the nozzle, thereby minimizing friction.  Connections:  Bottom M6 - Compatible with V6 and V5 Heater Block  Top designed to connect to the connec..

This version is more compact than the version v5.  The inner diameter 4.2 mm, which allows you to enter a teflon tube down the throat, thereby minimizing friction.  Connections:  Bottom M6 - Compatible with V6 and V5 Heater Block  Top designed to connect to the conne..

Compatible with 1.75mm filament  Material: Stainless steel This model has a very thin transition zone allows the creation of a highly effective thermal barrier   ..

Compatible with 1.75mm filament  Material: Stainless Steel This model allows the Teflon tube to reach from the extrusion zone to the nozzle. It does not include the Teflon tube. Compatible with the Teflon tube for filament 1.75mm. This configuration allows printing with PLA ..

V6DM heatsink, compatible with V6 components.Features:Aluminum heatsink, lighter and more compact.Great heat dissipation.Compatible with V6 components, M7 thread.For top mounting use M2.5 screws not included...

It is used to connect hotends and extruders to teflon tube. On one side it has a thread of 1/8" and on the other a teflon tube connector of 4mm diameter. This version allows the teflon tube pass through completely. ..