Fasteners

European standard T-bolt M6x25.This type of screw is placed directly from the outside of the profile, turning it 90 degrees clockwise automatically locks. It is very easy to install and it is also one of the most used accessories for the aluminum system.Material: carbon steel.Product Strength: Grade..

Spacers and eccentric nuts have a misaligned center, which allows them to be rotated away from or toward the printer profile to the pulley, adjusting the play of the elements.Material: carbon steel.1 unit..

Aluminum v-slot spacer, used in 3D printers, usually together with eccentric nuts or eccentric spacers, among other uses.Internal diameter: 5mmExternal diameter: 10mmThickness: 3mm1 unit..

Aluminum v-slot spacer, used in 3D printers, usually together with eccentric nuts or eccentric spacers, among other uses.Internal diameter: 5mmExternal diameter: 8mmThickness: 10mm1 unit..

Aluminum v-slot spacer, used in 3D printers, usually together with eccentric nuts or eccentric spacers, among other uses.Internal diameter: 5mmExternal diameter: 8mmThickness: 6mm1 unit..

Flat washer DIN-125-1 a zero zinc plated.Regulations: ISO: 7089.DIN: 125-1 A.NEN: 2269 A.This item has a minimum quantity. The unit price includes many decimal places, the updated price is shown according to the quantity selected.They are counted by weight, so an error of 5% is acceptable, alth..

DIN-127 b helical pressure washer.-Material: Steel.Regulations:DIN: 127 B.NEN: 1197 B.NF: E25-515.This item has a minimum quantity. The unit price includes many decimal places, the updated price is shown according to the quantity selected.They are counted by weight, so an error of 5% is acceptable, ..

Flat washer din-9021, flat b, made of galvanized steel.Regulations: ISO: 7093.DIN: 9021.NEN: 2276.NF: E25-513.This item has a minimum quantity. The unit price includes many decimal places, the updated price is shown according to the quantity selected.They are counted by weight, so an error of 5..

Hobbed Bolt for 3D printer, based on Reprap community design:  http://reprap.org/wiki/Wade's_Geared_Extruder#The_Hobbed_Bolt  M8 x 60mm knurled at a standard meassure, 25mm from the head of the bolt aproximately. This features are adapted to the last versions of Greg's Wade extruder, ..

Special Hardware Set: 2x M3x40 Partially threated bolts with springsM8x20 setscrew for the extruder idlerM3x10 setscrew small gear2x M5nylon nuts (in black or white) for Z axis. It is a great improvement, as nylon has an excelent abrasion resistance, also provides a softe..