Stock: In Stock
Model: TFT35-MKS
The MKS TFT35 V1.0 is a standalone 3.5-inch touchscreen designed to control 3D printers by sending G-code through a serial UART connection. It has its own processor, graphical interface and storage support, so it does not operate like a 12864 LCD connected through EXP1/EXP2: it communicates with a f..
27.99€
Ex Tax:23.13€
Stock: In Stock
Model: TMC2209-MKS
The MKS TMC2209 V2.0 is a StepStick driver for two-phase bipolar stepper motors, designed to reduce motion noise and allow advanced firmware configuration. It can operate through conventional STEP/DIR signals or use single-wire UART to configure current, microsteps, operating modes and diagnostics.
..
4.99€
Ex Tax:4.12€
Stock: In Stock
Model: MR105zz Bearing
The MR105ZZ is a precision shielded ball bearing with dimensions of 5 × 10 × 4 mm. It is commonly used in 3D printers for Direct Drive extruders and motion systems, providing smooth rotation, low friction and reliable operation.
The double metal shields (ZZ) help protect the bearing against dust ..
0.29€
Ex Tax:0.24€
Stock: In Stock
Model: Aislante-Térmico
This thermal insulation pad is designed to reduce heat loss from the underside of a heated bed, improving thermal efficiency and helping maintain a more stable printing temperature.
Features
Multi-layer thermal insulation structure.
Reduces heat loss from the heated bed.
Helps ..
1.50€
Ex Tax:1.24€
Stock: In Stock
Model: Llave6-7mm
Essential Tool for 3D Printer Maintenance – Nozzle Change and Heater Block AdjustmentThis tool is perfect for efficiently changing nozzles and adjusting heater blocks on your 3D printer.Multifunctional design: Allows you to change nozzles of different sizes and adjust heater blocks with ease.High pr..
1.99€
Ex Tax:1.64€
Stock: In Stock
Model: 36HS1718
HTA3D NEMA 14 36HS1718 bipolar stepper motor with a compact round pancake body and an integrated 10-tooth straight pinion. It is intended for geared extruders whose gearing, mounting pattern and electrical requirements match this exact motor.
The pinion is part of the motor shaft and drives the m..
12.70€
Ex Tax:10.50€
Stock: In Stock
Model: 17HS2408
The 17HS2408 is an especially compact bipolar NEMA 17 stepper motor. It combines a 28 mm body, a round 5 mm shaft and an approximate weight of only 150 g. Its reduced size and inertia suit light mechanisms, feeders, small axes and projects where space or moving mass matter more than the torque of a ..
8.10€
Ex Tax:6.69€
Out of Stock
Stock: Out of Stock
Model: 17HS3401
The 17HS3401 is a compact NEMA 17 stepper motor with a 34 mm body, 5 mm D-shaped shaft and 1.8° step angle. Its rated minimum holding torque is 28 N·cm. It can suit light or space-constrained mechanisms, including small belt axes, plotters, laser engravers and some moving extruders, provided the ava..
8.25€
Ex Tax:6.82€
Stock: In Stock
Model: 17HS4401s-T8x8-300MM
NEMA 17 17HS4401S bipolar stepper motor with an integrated 300 mm TR8×8 trapezoidal lead screw. It is intended for direct linear motion in Z axes, actuators and DIY machines without a coupling between the motor and the lead screw.
The lead screw forms part of the motor shaft, simplifying the asse..
23.99€
Ex Tax:19.83€
Stock: In Stock
Model: 17HS4401s-T8x8-310MM
NEMA 17 17HS4401S bipolar stepper motor with an integrated 310 mm TR8×8 trapezoidal lead screw. It is intended for direct linear motion in Z axes, actuators and DIY machines without a coupling between the motor and the lead screw.
The lead screw forms part of the motor shaft, simplifying the asse..
23.99€
Ex Tax:19.83€
Stock: In Stock
Model: 17HS4401s-T8x8-350MM
NEMA 17 17HS4401S bipolar stepper motor with an integrated 350 mm TR8×8 trapezoidal lead screw. It is intended for direct linear motion in Z axes, actuators and DIY machines without a coupling between the motor and the lead screw.
The lead screw forms part of the motor shaft, simplifying the asse..
25.00€
Ex Tax:20.66€
Stock: In Stock
Model: 17HS4401S-PG518
The 17HS4401S-PG518 combines a 1.8° bipolar NEMA 17 stepper motor with a single-stage planetary gearbox whose exact ratio is 57:11, or approximately 5.18:1. It is intended for mechanisms requiring more low-speed torque and resolution than a direct-drive NEMA 17.
The reduction converts the motor's..
34.99€
Ex Tax:28.92€