Out of Stock
Stock: Out of Stock
Model: POWGE-GT2-20T-10mm-di5
POWGE GT2 20-tooth idler pulley with an integrated bearing and side flanges. It is designed to guide or tension 10 mm GT2 belts when the toothed side of the belt runs against the pulley.
It is suitable for motion systems requiring a wider belt than the common 6 mm format, including certain CNC ma..
3.55€
Ex Tax:2.93€
Stock: In Stock
Model: POWGE-GT2-20T-6mm-di3
POWGE GT2 20-tooth idler pulley with an integrated bearing, intended for 6 mm belts and brackets using a nominal 3 mm axle or screw.
It is designed to guide or tension the toothed side of the belt in 3D printers, CNC machines and other GT2 mechanisms specifying a 20T idler with an M3 mounting.
..
3.55€
Ex Tax:2.93€
Out of Stock
Stock: Out of Stock
Model: POWGE-GT2-20T-6mm-di5
POWGE GT2 20-tooth idler pulley with an integrated bearing, designed for 6 mm belts and mounting on a nominal 5 mm axle or screw.
Its 20-tooth profile, side flanges and integrated bearing make it suitable for tensioners and guides contacting the toothed side of the belt in 3D printers, CNC machin..
3.55€
Ex Tax:2.93€
Out of Stock
Stock: Out of Stock
Model: POWGE-GT2-80Z-6mm
POWGE GT2 80-tooth pulley for 6 mm belts, made of aluminium alloy and catalogued with a 5 mm bore.
Its large diameter makes it primarily suitable as a driven pulley in belt reductions, rotary axes, CNC mechanisms and systems requiring increased output resolution or torque.
Verified features
..
9.79€
Ex Tax:8.09€
Stock: In Stock
Model: POWGE-GT2-20T-NoTeeth-10mm-di5
POWGE smooth idler pulley with an integrated bearing and a nominal 20T-equivalent size, designed to guide or tension the back of a GT2 belt up to 10 mm wide on a nominal 5 mm axle or screw.
Its smooth cylindrical running surface supports the back of the belt without engaging its teeth. The side f..
3.55€
Ex Tax:2.93€
Out of Stock
Stock: Out of Stock
Model: GT2-POWGE-RF-belt-10mm
POWGE RF 10 mm GT2 timing belt, manufactured from nylon-covered neoprene and internally reinforced with fiberglass.
This width is intended for transmissions designed with pulleys, idlers and fastening points for 10 mm GT2 belts. The RF range is intended to reduce vibration, friction and dust gene..
6.99€
Ex Tax:5.78€
Out of Stock
Stock: Out of Stock
Model: GT2-POWGE-RF-belt-6mm
POWGE RF 6 mm GT2 timing belt, manufactured from nylon-covered neoprene and internally reinforced with fiberglass cords.
The RF range is intended for synchronous transmissions where reduced vibration, friction and dust generation are preferred compared with a conventional POWGE belt. Actual perfo..
4.99€
Ex Tax:4.12€
Out of Stock
Stock: Out of Stock
Model: GT2-POWGE-RF-belt-9mm
POWGE RF 9 mm GT2 timing belt, manufactured from nylon-covered neoprene and reinforced with internal fiberglass cords.
Its increased width provides a larger tooth contact area than a 6 mm belt, provided that the pulleys, idlers and fastening points are designed for a 9 mm belt. The RF range is in..
6.85€
Ex Tax:5.66€
-40 %
Stock: In Stock
Model: Prusa i3 Rework-Tornillería
Fastener kit for assembling or repairing a Prusa i3 Rework with the classic mechanical configuration based on M10 threaded rods and M5-thread Z-axis motion. It brings together screws, nuts, washers, bed springs and the special hardware used by the extruder and Z axis.
It is a practical way to obtai..
20.00€ 12.00€
Ex Tax:9.92€
-34 %
Stock: In Stock
Model: Prusai3-Rework
This kit includes the printed parts required to assemble, repair or upgrade a Prusa i3 Rework 3D printer. All parts are designed to maintain compatibility with this printer model while incorporating several improvements over the original design to simplify assembly and enhance overall performance.
..
32.00€ 21.00€
Ex Tax:17.36€
Stock: In Stock
Model: PTC-12V-120W
The PTC Heater (Positive Temperature Coefficient) is the ideal solution for those seeking an efficient, safe, and long-lasting heating system. Ideal for heated 3D printers.Designed with advanced technology and high-quality materials, this device stands out for its exceptional performance and ease of..
14.99€
Ex Tax:12.39€
Only a few units in stock
-13 %
Stock: In Stock
Model: PTC-12V-70W
The PTC Heater (Positive Temperature Coefficient) is the ideal solution for those seeking an efficient, safe, and long-lasting heating system. Ideal for heated 3D printers.Designed with advanced technology and high-quality materials, this device stands out for its exceptional performance and ease of..
14.99€ 12.99€
Ex Tax:10.74€