12 V 5015 Centrifugal Blower Fan with 1 m Cable

5015-format centrifugal blower fan powered from 12 V and supplied with an approximately 1 metre cable. Its side outlet allows air to be directed through a duct, making it suitable for part cooling, compact air channels, electronics and other applications requiring localised airflow.

Specifications

• Format: 5015.
• Nominal dimensions: 50 × 50 × 15 mm.
• Nominal voltage: 12 V DC.
• Nominal current: 0.12 A ±10%.
• Approximate electrical power: 1.44 W.
• Declared speed: 4500 RPM ±10%.
• Declared airflow: 3.72 CFM.
• Declared noise level: 32.4 dBA ±10%.
• Cable length: approximately 1 m.
• Approximate weight: 28.5 g.
• Two-wire connection.

Applications

• 3D-printer part cooling.
• Compact air ducts and nozzles.
• Localised electronics cooling.
• Small cooling and automation projects.

Conditional compatibility

It may be fitted to systems designed for a 12 V 5015 blower when dimensions, outlet position, mounting holes, connector and polarity match.

Do not connect it directly to a 24 V output. Before replacing another fan, confirm that the controller can supply the required current and that the air duct cannot touch the impeller or obstruct the inlet.

24 V alternative

For machines using a 24 V fan output, see the 24 V 5015 centrifugal blower with 25 cm cable. Both versions share the nominal format but not their supply voltage or cable length.

Installation

• Check voltage and polarity before connection.
• Keep the circular air inlet unobstructed.
• Do not insert excessively long screws into the housing.
• Keep wires and printed parts away from the impeller.
• When PWM-controlled, confirm reliable starting at the minimum duty cycle used.

Package contents

• 1 × 12 V 5015 centrifugal blower fan.