GDSTIME 3010 24V Dual Ball Bearing Blower Fan with 15 cm Cable

GDSTIME 3010 24V centrifugal blower fan with dual ball bearings and a 15 cm cable. Its compact 30 × 30 × 10 mm format provides directed airflow in installations where very little space is available.

The dual ball bearing system is particularly suitable for applications involving long operating periods, higher working temperatures or mounting positions where reduced wear is preferred over a basic sleeve-bearing fan.

Key features

• Brand: GDSTIME.
• Model: GDB3010.
• Type: centrifugal blower fan.
• Nominal dimensions: 30 × 30 × 10 mm.
• Rated voltage: 24V DC.
• Rated current: 0.05A ±10%.
• Rated speed: 9000 RPM ±10%.
• Rated airflow: 1.85 CFM.
• Rated noise level: 29.2 dBA ±10%.
• Bearing system: dual ball bearing.
• Two-wire connection.
• Approximate cable length: 15 cm.
• Approximate weight: 12.5 g.

Applications

Suitable for directed cooling in 3D printers, compact electronic equipment, small mechanisms and other projects designed for a 3010 centrifugal blower.

Compatibility

Compatibility must be checked against the 24V supply voltage, external dimensions, mounting-hole positions, outlet orientation and the space available for the air duct. The 3010 designation defines the nominal size but does not guarantee compatibility with every bracket or duct.

Where additional space and cooling capacity are available, consider the GDSTIME 4010 24V ball bearing blower fan after checking the mounting geometry.

Installation

Check the supply voltage and wire polarity before connection. Do not connect the fan directly to a controller signal pin; use a suitable powered fan output or a correctly rated MOSFET stage.

When using PWM speed control, verify that the fan starts reliably at the configured minimum duty cycle. Low-speed behaviour can vary between fans and controllers.

Package contents

• 1 × GDSTIME 3010 24V centrifugal blower fan with 15 cm cable.