-14 %
Stock: In Stock
Model: 3DLAC Plus
3DLAC Plus is a concentrated adhesive designed to improve first-layer adhesion in 3D printing. Its 100ml spray-bottle format provides controlled application without using a pressurised aerosol.
It is particularly intended for demanding materials and prints requiring stronger adhesion, including A..
6.50€ 5.60€
Ex Tax:4.63€
Only a few units in stock
-7 %
Stock: In Stock
Model: 3DNylon
3DNYLON 30 ml is a brush-on adhesive specifically developed to improve the first layer when printing nylon or polyamide (PA) filaments. It helps keep the part attached to the bed and reduce corner lifting, a common challenge with this material.
The applicator makes it possible to spread a thin, eve..
21.00€ 19.50€
Ex Tax:16.12€
Only a few units in stock
-11 %
Stock: In Stock
Model: 3Dtouch
The 3DTouch is an automatic bed leveling sensor for 3D printers. During the print preparation process, the probe detects the position of the print surface to help compensate for possible height differences between different points of the build plate.
This version features a non-metallic probe and..
13.99€ 12.45€
Ex Tax:10.29€
Only a few units in stock
-12 %
Stock: In Stock
Model: MK3-400-24V+
400 × 400 mm aluminium-core MK3 heated bed for large-format 3D printers. It is 3 mm thick, operates at 24 V and is rated at approximately 260 W. A roughly 90 cm cable and 100 kΩ temperature sensor are fitted.Nominal current is approximately 10.8 A and equivalent resistance about 2.22 Ω. Mounting cen..
62.00€ 54.50€
Ex Tax:45.04€
-47 %
Out of Stock
Stock: Out of Stock
Model: 4010-12v 1m
This 40 × 40 × 10 mm axial cooling fan operates at 12 V DC and features a 1 metre cable, making it ideal for installations where additional cable length is required between the fan and the controller or power source.
Features
40 × 40 × 10 mm axial cooling fan.
12 V DC operation.
..
4.25€ 2.25€
Ex Tax:1.86€
-47 %
Stock: In Stock
Model: 4010-24v 1m
4010 24V axial fan with a 1 metre power cable and a 2-pin XH2.54 connector. Its nominal 40 × 40 × 10 mm dimensions make it suitable for cooling hotends, heatsinks, electronics and small compartments.
The long cable simplifies installation in 3D printers and other machines where the controller boa..
4.25€ 2.25€
Ex Tax:1.86€
-69 %
Stock: In Stock
Model: 4020-24v
4020 24V axial fan with a PH connector and a 17 cm cable. Its nominal 40 × 40 × 20 mm dimensions provide a deeper housing than a 4010 fan, producing direct airflow for heatsinks, electronics and small compartments.
It is intended for applications where there is space for a 20 mm thick fan and con..
4.75€ 1.49€
Ex Tax:1.23€
-25 %
Stock: In Stock
Model: 4020-BallBearing-Fan-24V-1m
4020 24V axial fan with a ball bearing system and a 1 metre power cable. Its 40 × 40 × 20 mm format is suitable for cooling heatsinks, electronics and compact equipment that can accommodate a 20 mm thick housing.
The ball bearing system is intended for frequent or extended operation, particularly..
4.80€ 3.60€
Ex Tax:2.98€
-7 %
Out of Stock
Stock: Out of Stock
Model: MK3-500-24V+
500 × 500 × 3 mm aluminium MK3 heated bed for large-format 24 V FDM projects. Rated power is approximately 280 W; nominal current is about 11.7 A and equivalent resistance about 2.06 Ω. It includes roughly 90 cm of wiring and a 100 kΩ sensor.Weight is approximately 2105 g. Mounting centres are 460 m..
73.50€ 68.50€
Ex Tax:56.61€
-71 %
Stock: In Stock
Model: 6010-24V
6010 24V axial fan with an 11-blade impeller, a 2-pin XH2.54 connector and an approximately 20 cm cable. Its nominal 60 × 60 × 10 mm dimensions provide broad airflow while maintaining a slim profile.
It is suitable for cooling electronics, controller boards, power supplies and small enclosures us..
5.45€ 1.59€
Ex Tax:1.31€
-68 %
Stock: In Stock
Model: 6015-24v
6015 24V axial fan with a 7-blade impeller, a 2-pin XH2.54 connector and an approximately 20 cm cable. Its 60 × 60 × 15 mm dimensions provide an intermediate format between 6010 and 6020 fans.
It can be used to cool electronic boards, power supplies, controllers and compartments requiring air cir..
5.99€ 1.89€
Ex Tax:1.56€
-28 %
Stock: In Stock
Model: 6015-BallBearing-Fan-24V
6015 24V axial fan with a ball bearing system and a 15 cm cable. Its nominal 60 × 60 × 15 mm dimensions make it suitable for cooling electronics, power supplies and enclosures used in 3D printers or CNC machines.
The ball bearing system is particularly suitable for equipment subject to extended o..
4.50€ 3.25€
Ex Tax:2.69€