Only a few units in stock
-8 %
Stock: In Stock
Model: CC-Silicona100x100-24V
100 × 100 mm, 24 V, 60 W adhesive flexible silicone heater for bonding beneath a compatible aluminium plate to build a compact heated bed. It is supplied wired and includes a 100K B3950 NTC thermistor with an XH2.54 connector.
Its nominal current is 2.5 A, making it suitable for small printers, tes..
12.50€ 11.50€
Ex Tax:9.50€
-17 %
Stock: In Stock
Model: Cable Bipolar - 1mm2
Flexible twin wire made from two parallel conductors, each with a nominal cross-sectional area of 1mm². Its transparent insulation leaves the conductors visible, while a longitudinal red stripe identifies one side throughout the cable.
It is sold by the metre and can be supplied as a single conti..
0.59€ 0.49€
Ex Tax:0.41€
-53 %
Stock: In Stock
Model: 2004 LCD
Description
The 2004 LCD Smart Controller allows a 3D printer to be operated without a permanent computer connection. It features a 20×4 character LCD display, an integrated SD card reader and a rotary encoder for menu navigation.
When supported by the firmware, print jobs can be selected and ..
18.99€ 8.99€
Ex Tax:7.43€
-10 %
Stock: In Stock
Model: Base-rugosa-22x22
220 × 220 mm Double-Sided Textured PEI Flexible Sheet
Flexible steel sheet with a textured PEI surface on both sides, designed for use on a compatible magnetic 3D-printer bed. The surface helps hold the first layer and parts can be removed by flexing the sheet after it cools.
Nominal size: 220 × 2..
17.75€ 15.99€
Ex Tax:13.21€
Only a few units in stock
-9 %
Stock: In Stock
Model: Base-Lisa-Rugosa-22x22
220 × 220 mm PEI Flexible Sheet with One Smooth and One Textured Side
Flexible steel sheet coated with PEI on both sides: one surface is smooth and the other textured. Choose the finish that best suits the filament and the desired print result.
Nominal size: 220 × 220 mm.Base: flexible spring stee..
22.50€ 20.50€
Ex Tax:16.94€
-6 %
Out of Stock
Stock: Out of Stock
Model: Base-rugosa-23.5x23.5
235 × 235 mm Double-Sided Textured PEI Flexible Sheet
Flexible steel sheet with textured PEI on both sides for a compatible 235 × 235 mm magnetic bed. Flexing the cooled sheet helps remove printed parts.
Nominal size: 235 × 235 mm.Base: flexible spring steel.Surface: textured PEI on both sides.Spe..
21.25€ 19.99€
Ex Tax:16.52€
-9 %
Out of Stock
Stock: Out of Stock
Model: Base-Lisa-Rugosa-23.5x23.5
235 × 235 mm PEI Flexible Sheet with One Smooth and One Textured Side
Flexible steel sheet coated with PEI on both sides, with one smooth and one textured surface. Choose the print finish on a compatible 235 × 235 mm magnetic bed.
Nominal size: 235 × 235 mm.Base: flexible spring steel.Surfaces: on..
23.25€ 21.25€
Ex Tax:17.56€
Only a few units in stock
-11 %
Stock: In Stock
Model: Energetic-base-241x254
241 × 254 mm Flexible Steel Sheet with PEI on Both Sides
Flexible spring-steel sheet with PEI/Ultem coating on both sides, designed for magnetic beds with a nominal 241 × 254 mm surface. Flexing the steel after cooling helps remove printed parts.
Nominal size: 241 × 254 mm.Base material: flexible ..
45.00€ 39.99€
Ex Tax:33.05€
-14 %
Stock: In Stock
Model: 2510-12V
This 12 V 2510 brushless cooling fan provides efficient airflow in compact spaces. Measuring just 25 × 25 × 10 mm, it is ideal for cooling hotends, electronics, drivers, Raspberry Pi boards and other equipment where installation space is limited.
Features
Brushless DC cooling fan.
C..
3.00€ 2.59€
Ex Tax:2.14€
Only a few units in stock
-17 %
Stock: In Stock
Model: CC-Silicona300x300-24V
300 × 300 mm, 24 V, 300 W adhesive flexible silicone heater for bonding beneath a compatible aluminium plate and building a large-format heated bed. It is supplied wired and includes a 100K B3950 NTC thermistor with an XH2.54 connector.
The adhesive format transfers heat to the plate without a bulk..
41.50€ 34.50€
Ex Tax:28.51€
Only a few units in stock
-25 %
Stock: In Stock
Model: Base-rugosa-33x33
330 × 330 mm Double-Sided Textured PEI Flexible Sheet
Flexible steel sheet with textured PEI on both sides for 3D printers using a compatible 330 × 330 mm magnetic base. Parts can be removed by gently flexing the sheet after it has cooled.
Nominal size: 330 × 330 mm.Base: flexible spring steel.Sur..
29.99€ 22.50€
Ex Tax:18.60€
-23 %
Stock: In Stock
Model: 3DLAC
3DLAC is a Spanish-made aerosol adhesive designed to improve first-layer adhesion to the printing surface. It helps reduce corner lifting and warping when printing materials such as PLA, ABS, PETG, Nylon and TPU, provided that the bed, temperature and first-layer settings are correctly adjusted.
..
7.50€ 5.80€
Ex Tax:4.79€