Stock: In Stock
Model: UPS-24V
The BIGTREETECH UPS 24V V1.0 is a power-loss detection and recovery module for 3D printers operating exclusively from 24V DC. When the main supply disappears, it signals the controller board and uses the energy stored in its supercapacitors to keep the electronics powered for a short time.
This r..
11.25€
Ex Tax:9.30€
Stock: In Stock
Model: Eco Turbo Fan Pipe
The BIQU Eco Turbo Fan Pipe is the flexible duct designed to carry air from the Eco Turbo Kit V1.0 to the part-cooling system installed on the toolhead. It allows the blower to remain off the carriage so that its weight does not move with the printer axes.
Its nominal 1.8 m length provides routin..
8.95€
Ex Tax:7.40€
Stock: In Stock
Model: Eco Turbo Kit
The BIQU Eco Turbo Kit V1.0 is a remote part-cooling system for 3D printers. It combines a Nidec brushless centrifugal blower with a BIGTREETECH controller board and transports air to the toolhead through a flexible hose.
Moving the blower away from the toolhead can reduce moving mass compared wi..
39.99€
Ex Tax:33.05€
Stock: In Stock
Model: H2 V2S
BIQU H2 V2S Dual-Gear Direct Extruder for 1.75 mm Filament
The BIQU H2 V2S is a compact direct extruder with integrated hotend for 1.75 mm filament. It combines dual drive gears, a 7:1 reduction and a bi-metal heatbreak in a toolhead designed to convert a compatible machine to direct extrusion wi..
76.45€
Ex Tax:63.18€
Stock: In Stock
Model: H2 V2X
BIQU H2 V2X 7:1 Direct Extruder for Voron StealthBurner and EVA 3
The BIQU H2 V2X is a lightweight, compact direct extruder designed for modular toolheads such as Voron StealthBurner and EVA 3. It combines the motor, 7:1 gearbox and dual drive gears in a 145 g machined aluminium body, reducing mo..
58.25€
Ex Tax:48.14€
New
Stock: In Stock
Model: Nebula
The BIQU Nebula is a compact 143 g direct-drive extruder combining an 11.25:1 planetary reduction, dual drive gears, a filament sensor, programmable button and RGB lighting. It targets lightweight CoreXY toolheads and DIY builds that need controlled filament feed together with assisted loading and u..
58.75€
Ex Tax:48.55€
Out of Stock
Stock: Out of Stock
Model: 30A mosfet-module
The BIQU116-A2 is an external MOSFET module used to switch a 12 or 24V DC heated bed or another resistive load from a controller board's heater output. The electronics retain temperature regulation while the module switches current supplied directly by the power supply.
Its large heatsink, separa..
13.95€
Ex Tax:11.53€
Stock: In Stock
Model: Teflón-4-2-negro
Black 2×4 mm PTFE tube for guiding 1.75 mm filament in 3D printers and Bowden systems. Its low-friction surface helps filament move when the machine uses fittings for 4 mm outside-diameter tubing.
It is supplied in 1 m per unit lengths. You can select several units to request a longer continuous se..
1.65€
Ex Tax:1.36€
Out of Stock
Stock: Out of Stock
Model: Clip-cristal
Black metal clip with a knurled adjustment screw for securing glass and other removable rigid build surfaces to a 3D printer heated bed.
The U-shaped body fits over the edge of the bed, while the screw allows the clamping pressure to be adjusted. Its compact design occupies little space on the bu..
3.75€
Ex Tax:3.10€
Stock: In Stock
Model: Bisagra 3030
Hinge for creating articulated joints in structures built from 3030 aluminum profiles. It provides an opening angle of up to 270°, making it suitable for doors, panels, covers and other moving elements that require a wide range of rotation.
Features
Designed for 30 × 30 mm aluminum profiles.
..
0.60€
Ex Tax:0.50€
-29 %
Stock: In Stock
Model: PiezasImpresas-EjeX-3DSteel
A set of black PETG printed parts for building or repairing the HTA3D 3DSteel X axis. The base set contains both X ends and the sliding belt tensioner; the X carriage and fasteners are available as separate options.
These parts work together with the rods, bearings, Z lead screws, motor and trans..
12.00€ 8.50€
Ex Tax:7.02€
Stock: In Stock
Model: Sello Slot6
Flexible PVC slot cover strip for aluminium profiles with a 6 mm slot. Also known as a sealing strip or flat seal, it is pressed into unused slots to provide a cleaner finish and limit the direct accumulation of dust and debris.
This version is dimensioned for HTA3D 20 series profiles, including ..
0.70€
Ex Tax:0.58€