Stock: In Stock
Model: TFT35-V3.0
The BIGTREETECH TFT35 V3.0 combines two different ways of controlling a 3D printer in a 3.5-inch touchscreen: a standalone Touch Mode communicating over UART and a Marlin Mode that emulates a 12864 graphical LCD. When both interfaces are wired and configured, you can switch between the convenience o..
53.50€
Ex Tax:44.21€
Out of Stock
Stock: Out of Stock
Model: TFT43-V3.0
The BIGTREETECH TFT43 V3.0 combines a 4.3-inch touchscreen with graphical 12864 LCD emulation. Use the touch menu through a serial link to the mainboard, or use the printer firmware's own menu through the EXP connectors. It suits Marlin builds that need a larger display while retaining encoder-based..
73.99€
Ex Tax:61.15€
Stock: In Stock
Model: TMC2130-SPI
The BIGTREETECH TMC2130 V3.0 SPI is a two-phase bipolar stepper driver prepared for SPI communication. Motion uses STEP/DIR while firmware can set current and microsteps, select the chopper mode and read diagnostics.
This advanced version requires a socket or external wiring with the correct CS, SC..
7.99€
Ex Tax:6.60€
Stock: In Stock
Model: TMC2130-STEP/DIR
The BIGTREETECH TMC2130 V3.0 STEP/DIR is a bipolar stepper motor driver factory-configured for standalone operation. It receives STEP, DIR and ENABLE signals from the controller board, while motor current and microstep mode are set through the potentiometer and the socket's physical configuration.
..
7.99€
Ex Tax:6.60€
Stock: In Stock
Model: TMC2208-UART-Bigtreetech
The BIGTREETECH TMC2208 V3.0 UART is a StepStick driver for two-phase bipolar stepper motors, designed to substantially reduce motion noise in 3D printers, light CNC machines and automation projects. It combines STEP/DIR control with single-wire UART communication, allowing firmware configuration of..
4.25€
Ex Tax:3.51€
Stock: In Stock
Model: TMC2209-Bigtreetech
The BIGTREETECH TMC2209 V1.3 is a StepStick driver for two-phase bipolar stepper motors, designed for quiet motion, accurate control and advanced configuration in 3D printers, light CNC machines, robots and automation projects. It can operate through standard STEP/DIR signals or communicate over UAR..
4.75€
Ex Tax:3.93€
Stock: In Stock
Model: TMC2225-UART-Bigtreetech
BIGTREETECH TMC2225 V1.0 is a silent driver for two-phase bipolar stepper motors. It can operate through STEP/DIR signals or a single-wire UART connection. It includes StealthChop2 for quieter movement, SpreadCycle for more dynamic operation and MicroPlyer interpolation up to 256 microsteps.
Its ..
4.50€
Ex Tax:3.72€
Stock: In Stock
Model: TMC2226-Bigtreetech
The BIGTREETECH TMC2226 V1.0 is a StepStick driver for two-phase bipolar stepper motors, designed to combine quiet motion, accurate control and advanced configuration in 3D printers, light CNC machines, robots and automation projects. It can operate through standard STEP/DIR signals or communicate o..
4.99€
Ex Tax:4.12€
Stock: In Stock
Model: TMC2240-BTT
BIGTREETECH TMC2240 V1.0 is an intelligent two-phase stepper motor driver combining quiet motion, dynamic control, digitally adjustable current and advanced diagnostics. This version is supplied in its factory SPI configuration, allowing the firmware to configure and query the driver without physica..
8.92€
Ex Tax:7.37€
Stock: In Stock
Model: TMC5160Tpro-BTT
The BIGTREETECH TMC5160 Pro V1.1 is an SPI driver for two-phase bipolar stepper motors, designed for machines requiring more voltage and current headroom than common compact drivers can provide. It combines Trinamic TMC5160 control with an external-MOSF power stage while retaining features such as S..
22.45€
Ex Tax:18.55€
Only a few units in stock
-7 %
Stock: In Stock
Model: TMC5160Tplus-BTT
The BIGTREETECH TMC5160T Plus V1.0 is an external high-power driver for two-phase bipolar stepper motors. It combines a TMC5160-TA controller with eight external MOSFETs, a dedicated power terminal, heatsink enclosure and SPI connectivity, providing substantially more headroom than a conventional pl..
49.90€ 46.20€
Ex Tax:38.18€
Stock: In Stock
Model: U2C-BTT
The BIGTREETECH U2C V2.1 is a USB-to-CAN interface designed to connect a Linux computer —such as a Raspberry Pi— to the CAN boards in a 3D printer. It is particularly useful in Klipper installations with toolhead boards because it creates a dedicated SocketCAN interface without using the main contro..
14.95€
Ex Tax:12.36€