-8 %
Stock: In Stock
Model: Relé 10A Omron
Omron G3NB-210B-1 solid-state relay for controlling AC loads from a 5 to 24 V DC signal. Its 24 to 220 V AC output is particularly suitable for resistive heaters, automation and properly protected mains-powered heated beds.
Main specifications
ReferenceOmron G3NB-21..
15.00€ 13.75€
Ex Tax:11.36€
Out of Stock
Stock: Out of Stock
Model: Final de Carrera óptico
This optical endstop is designed to accurately detect the travel limit or home position of a moving axis. Since it operates without mechanical contact, it provides fast detection with virtually no wear, making it a common choice for 3D printers, CNC machines and other automation systems.
Features..
1.35€
Ex Tax:1.12€
Stock: In Stock
Model: Orbiter-V2.5-upgrade
This Orbiter V2.5 upgrade kit updates the transmission of an existing Orbiter V2.0 extruder without replacing the full assembly. It adds the revised drive-gear geometry, a pre-assembled spider shaft, planetary gears and moulded gear housing.
Important: this is a mechanical upgrade kit, not a comple..
35.99€
Ex Tax:29.74€
Stock: In Stock
Model: P3Steel-frame
The P3Steel frame is manufactured from laser-cut galvanized steel, providing a rigid and stable structure for building or upgrading Prusa i3 style 3D printers. Its high structural rigidity helps improve print accuracy while reducing vibrations during operation.
Features
P3Steel frame com..
85.00€
Ex Tax:70.25€
Stock: In Stock
Model: LCD-Cable-1m
A pack of two 1 m flat ribbon cables with ten conductors and 2 × 5 female IDC connectors. It is intended for RepRap LCD displays that need simultaneous EXP1 and EXP2 connections to a compatible controller or adapter.
The one-metre length makes it easier to mount a display away from the electronic..
1.85€
Ex Tax:1.53€
Stock: In Stock
Model: dual-axis-module
This parallel stepper motor splitter module connects two four-wire bipolar motors to a single controller-board motor output. It is commonly used on 3D printers with two Z-axis motors, although it can also serve other axes or mechanisms where two motors must move simultaneously from the same driver.
..
1.25€
Ex Tax:1.03€
-30 %
Stock: In Stock
Model: Eje-Y-3DSteel-V2
A set of PETG printed parts for building or repairing the HTA3D 3DSteel V2 Y axis. It includes the linear-bearing holders, motor-mount spacers and belt anchor used by the original design.
This is a machine-specific mechanical subset rather than a universal kit for every P3Steel or Prusa i3 Steel...
5.00€ 3.50€
Ex Tax:2.89€
Out of Stock
Stock: Out of Stock
Model: RTD-Sensor-PT1000-Naked-head-Rapido2F
Replacement PT1000 Bare Head temperature sensor for the Phaetus RAPIDO 2F hotend. It replaces the original sensor while retaining the PT1000 RTD measurement system intended for this hotend.
Features
Type: PT1000 RTD sensor.
Replaceable Bare Head format.
Designed for the Phaetus RAPIDO 2F syste..
10.89€
Ex Tax:9.00€
-4 %
Out of Stock
Stock: Out of Stock
Model: Rapido-HF-2.0F-Blue
Phaetus RAPIDO 2 hotend in the HF high-flow configuration, featuring a blue heatsink and designed for 1.75 mm filament. Its extended heating zone is intended for fast printers that require more consistent material melting than a conventional hotend can provide.
This product is the RAPIDO Hotend 2..
99.00€ 94.99€
Ex Tax:78.50€
Only a few units in stock
-6 %
Stock: In Stock
Model: Rapido-UHF-2.0F-Black
Phaetus RAPIDO 2 hotend in the UHF ultra-high-flow configuration, featuring a black heatsink and designed for 1.75 mm filament. Its extended melting zone is intended for fast printers and applications where a conventional hotend may become the limiting factor for material flow.
This product is th..
105.99€ 99.99€
Ex Tax:82.64€
-48 %
Stock: In Stock
Model: PLAHD-Particles-1.75mm
This filament includes particles in its composition, so it is recommended to use 0.6mm nozzles or higher.CHARACTERISTICS: It is a filament manufactured in Spain for 3D printers with FFF/FDM technology. PLA is a biodegradable plastic obtained from natural resources from starch extracted fr..
10.50€ 5.50€
Ex Tax:4.55€
-20 %
Stock: In Stock
Model: CajaRamps-3DSteel
Printed enclosure designed to install and protect the RAMPS 1.4-based electronics used by the HTA3D 3DSteel 3D printer.
Its geometry allows it to be attached to the machine frame, keeps the electronic components protected and provides room for organising surplus wiring. It is printed in PLA.
..
7.50€ 6.00€
Ex Tax:4.96€