Out of Stock
Stock: Out of Stock
Model: Robin-Nano
The MKS Robin Nano V3.1 is a 32-bit control board for building or upgrading a 3D printer's electronics. This revision uses an STM32F407VET6 at 168 MHz, with 512 KB flash and 192 KB RAM, and accepts replaceable stepper drivers. It offers connections for two extruders, a heated bed, display, fans and ..
41.75€
Ex Tax:34.50€
Stock: In Stock
Model: Robin-Wifi
The MKS Robin WiFi adds 2.4 GHz wireless connectivity to compatible Makerbase controller boards fitted with the dedicated socket for this module. It uses an ESP8266-based ESP-12S and can transfer files, report status and relay commands from compatible applications over a local network.
It is not ..
7.99€
Ex Tax:6.60€
Only a few units in stock
-13 %
Stock: In Stock
Model: Modulo-Wifi-MKS
The MKS TFT WiFi V1.0 module adds 2.4 GHz wireless connectivity to compatible Makerbase touchscreens. It combines an ESP8266-based ESP-12S with the 2 × 4 MKS TFT WiFi host connector.
With suitable firmware it can work with compatible LAN tools, send files to storage managed by the screen and rela..
8.00€ 6.99€
Ex Tax:5.78€
Stock: In Stock
Model: TFT35-MKS
The MKS TFT35 V1.0 is a standalone 3.5-inch touchscreen designed to control 3D printers by sending G-code through a serial UART connection. It has its own processor, graphical interface and storage support, so it does not operate like a 12864 LCD connected through EXP1/EXP2: it communicates with a f..
27.99€
Ex Tax:23.13€
Stock: In Stock
Model: TMC2209-MKS
The MKS TMC2209 V2.0 is a StepStick driver for two-phase bipolar stepper motors, designed to reduce motion noise and allow advanced firmware configuration. It can operate through conventional STEP/DIR signals or use single-wire UART to configure current, microsteps, operating modes and diagnostics.
..
4.99€
Ex Tax:4.12€
Stock: In Stock
Model: MR105zz Bearing
The MR105ZZ is a precision shielded ball bearing with dimensions of 5 × 10 × 4 mm. It is commonly used in 3D printers for Direct Drive extruders and motion systems, providing smooth rotation, low friction and reliable operation.
The double metal shields (ZZ) help protect the bearing against dust ..
0.29€
Ex Tax:0.24€
Stock: In Stock
Model: Aislante-Térmico
This thermal insulation pad is designed to reduce heat loss from the underside of a heated bed, improving thermal efficiency and helping maintain a more stable printing temperature.
Features
Multi-layer thermal insulation structure.
Reduces heat loss from the heated bed.
Helps ..
1.50€
Ex Tax:1.24€
Stock: In Stock
Model: Llave6-7mm
Essential Tool for 3D Printer Maintenance – Nozzle Change and Heater Block AdjustmentThis tool is perfect for efficiently changing nozzles and adjusting heater blocks on your 3D printer.Multifunctional design: Allows you to change nozzles of different sizes and adjust heater blocks with ease.High pr..
1.99€
Ex Tax:1.64€
Stock: In Stock
Model: 36HS1718
HTA3D NEMA 14 36HS1718 bipolar stepper motor with a compact round pancake body and an integrated 10-tooth straight pinion. It is intended for geared extruders whose gearing, mounting pattern and electrical requirements match this exact motor.
The pinion is part of the motor shaft and drives the m..
12.70€
Ex Tax:10.50€
Stock: In Stock
Model: 17HS2408
The 17HS2408 is an especially compact bipolar NEMA 17 stepper motor. It combines a 28 mm body, a round 5 mm shaft and an approximate weight of only 150 g. Its reduced size and inertia suit light mechanisms, feeders, small axes and projects where space or moving mass matter more than the torque of a ..
8.10€
Ex Tax:6.69€
Out of Stock
Stock: Out of Stock
Model: 17HS3401
The 17HS3401 is a compact NEMA 17 stepper motor with a 34 mm body, 5 mm D-shaped shaft and 1.8° step angle. Its rated minimum holding torque is 28 N·cm. It can suit light or space-constrained mechanisms, including small belt axes, plotters, laser engravers and some moving extruders, provided the ava..
8.25€
Ex Tax:6.82€
Stock: In Stock
Model: 17HS4401s-T8x8-300MM
NEMA 17 17HS4401S bipolar stepper motor with an integrated 300 mm TR8×8 trapezoidal lead screw. It is intended for direct linear motion in Z axes, actuators and DIY machines without a coupling between the motor and the lead screw.
The lead screw forms part of the motor shaft, simplifying the asse..
23.99€
Ex Tax:19.83€