Stock: In Stock
Model: dual-axis-module
This parallel stepper motor splitter module connects two four-wire bipolar motors to a single controller-board motor output. It is commonly used on 3D printers with two Z-axis motors, although it can also serve other axes or mechanisms where two motors must move simultaneously from the same driver.
..
1.25€
Ex Tax:1.03€
-30 %
Stock: In Stock
Model: Eje-Y-3DSteel-V2
A set of PETG printed parts for building or repairing the HTA3D 3DSteel V2 Y axis. It includes the linear-bearing holders, motor-mount spacers and belt anchor used by the original design.
This is a machine-specific mechanical subset rather than a universal kit for every P3Steel or Prusa i3 Steel...
5.00€ 3.50€
Ex Tax:2.89€
Stock: In Stock
Model: Thermistor-PT1000-barehead-Rapido2F
Replacement PT1000 Bare Head temperature sensor for the Phaetus RAPIDO 2F hotend. It replaces the original sensor while retaining the PT1000 RTD measurement system intended for this hotend.
Features
Type: PT1000 RTD sensor.
Replaceable Bare Head format.
Designed for the Phaetus RAPIDO 2F syste..
10.89€
Ex Tax:9.00€
-4 %
Out of Stock
Stock: Out of Stock
Model: Rapido-HF-2.0F-Blue
Phaetus RAPIDO 2 hotend in the HF high-flow configuration, featuring a blue heatsink and designed for 1.75 mm filament. Its extended heating zone is intended for fast printers that require more consistent material melting than a conventional hotend can provide.
This product is the RAPIDO Hotend 2..
99.00€ 94.99€
Ex Tax:78.50€
Only a few units in stock
-6 %
Stock: In Stock
Model: Rapido-UHF-2.0F-Black
Phaetus RAPIDO 2 hotend in the UHF ultra-high-flow configuration, featuring a black heatsink and designed for 1.75 mm filament. Its extended melting zone is intended for fast printers and applications where a conventional hotend may become the limiting factor for material flow.
This product is th..
105.99€ 99.99€
Ex Tax:82.64€
-48 %
Stock: In Stock
Model: PLAHD-Particles-1.75mm
This filament includes particles in its composition, so it is recommended to use 0.6mm nozzles or higher.CHARACTERISTICS: It is a filament manufactured in Spain for 3D printers with FFF/FDM technology. PLA is a biodegradable plastic obtained from natural resources from starch extracted fr..
10.50€ 5.50€
Ex Tax:4.55€
-20 %
Stock: In Stock
Model: CajaRamps-3DSteel
Printed enclosure designed to install and protect the RAMPS 1.4-based electronics used by the HTA3D 3DSteel 3D printer.
Its geometry allows it to be attached to the machine frame, keeps the electronic components protected and provides room for organising surplus wiring. It is printed in PLA.
..
7.50€ 6.00€
Ex Tax:4.96€
-20 %
Stock: In Stock
Model: Caja-Electronica-3DSteel-V2
Printed enclosure designed to install and protect the BIGTREETECH SKR V1.4 board used by the HTA3D 3DSteel V2 3D printer.
It attaches to the machine frame and helps keep the electronics protected and the wiring organised. It is printed in PLA, with geometry designed for the SKR 1.4 installation u..
7.50€ 6.00€
Ex Tax:4.96€
Stock: In Stock
Model: Nozzle-1.75-PlatedCopper-0.6
These nozzles are designed to achieve the best performance at high temperatures.Made from a special high-temperature copper alloy with a softening point well above 500 ° C, and with much higher thermal conductivity, these silver-plated copper nozzles are perfect for high-temperature applications, wh..
6.50€
Ex Tax:5.37€
Stock: In Stock
Model: Alicate-corte
The PLATO 170 Platoshear is a compact flush-cutting tool designed for precision electronics and assembly work. Its thin blade profile provides access to confined areas and makes it particularly useful for cutting 3D printing filament, electronic component leads and soft copper wire.
It uses a she..
2.50€
Ex Tax:2.07€
Stock: In Stock
Model: Rueda-Vslot-625zz-V
POM wheel with a peripheral V-shaped groove and an integrated 625ZZ ball bearing. It is designed for mechanisms in which the wheel runs against a rail, edge or guide with a geometry matching this groove.
Unlike V-Slot wheels with a rounded or bevelled outer surface, this version has a clearly def..
0.99€
Ex Tax:0.82€
Out of Stock
Stock: Out of Stock
Model: Rueda-Vslot-625zz
Motion wheel for compatible V-Slot guiding systems, manufactured from POM and fitted with a 625ZZ ball bearing. Its outer running surface has a central section and bevelled edges designed to roll against a matching rail geometry.
The 24 mm outer diameter and nominal 5 mm axle size are commonly us..
1.25€
Ex Tax:1.03€