Out of Stock
Stock: Out of Stock
Model: Clip-cristal
Black metal clip with a knurled adjustment screw for securing glass and other removable rigid build surfaces to a 3D printer heated bed.
The U-shaped body fits over the edge of the bed, while the screw allows the clamping pressure to be adjusted. Its compact design occupies little space on the bu..
3.75€
Ex Tax:3.10€
-32 %
Stock: In Stock
Model: Dimafix
DIMAFIX Adhesive Spray for 3D Printer Heated Beds — 400 ml
DIMAFIX is an adhesive spray for improving first-layer adhesion on FFF/FDM 3D printers with heated beds. It is especially useful when a print needs additional protection against lifting or warping during printing.
Adhesion activates when t..
18.99€ 12.85€
Ex Tax:10.62€
New
Stock: In Stock
Model: Dimafix-pen
DIMAFIX Pen Heated-Bed Adhesive for 3D Printing — 90 ml
Liquid DIMAFIX adhesive in an applicator-pen format for improving first-layer adhesion on FFF/FDM 3D printers with heated beds. The pen format allows precise, local application to the print area.
Its adhesive effect activates at approximately..
13.25€
Ex Tax:10.95€
Stock: In Stock
Model: HB-fysetc-220x220-24v
FYSETC 220 × 220 mm, 24 V magnetic heated bed designed to work with a removable flexible spring-steel build plate. The magnets are embedded in the rear of the heated bed, removing the need to install a separate adhesive magnetic base.
It is a practical solution for building or upgrading a 3D prin..
45.99€
Ex Tax:38.01€
Stock: In Stock
Model: Espaciadores-MK52
FYSETC spacer and screw kit for mounting a nine-point MK52 heated bed on its Y carriage. The spacers establish a consistent rigid distance between both components, replacing the springs used by many four-point adjustable beds.
The arrangement follows the traditional system used by the Original Pr..
2.99€
Ex Tax:2.47€
Stock: In Stock
Model: CamaCaliente-sujecion
Hardware kit for mounting and levelling a 3D-printer heated bed with four countersunk holes. It includes M3 screws, compression springs, wide washers and self-locking nuts to create four adjustable mounting points.
The springs allow the distance between the heated bed and Y carriage to be adjuste..
1.50€
Ex Tax:1.24€
New
Stock: In Stock
Model: Base-Mec-330
330 × 330 × 8 mm machined cast aluminium plate, designed by HTA3D as a robust foundation for a 3D-printer bed. Its thickness adds rigidity and thermal mass, while the machined countersinks and auxiliary threads allow clean integration into a compatible structure.
This size is used by the assemble..
61.99€
Ex Tax:51.23€
New
Stock: In Stock
Model: Base-Mec-400
400 × 400 × 8 mm machined cast aluminium plate, designed by HTA3D for large-format 3D-printer beds. Its 8 mm thickness provides a robust structure and substantial thermal mass on which to install the heater and print surface required by the project.
This is not a complete heated bed: the supplied..
88.99€
Ex Tax:73.55€
New
Stock: In Stock
Model: Base-Mec-500
500 × 500 × 8 mm machined cast aluminium plate, designed by HTA3D for large-format 3D-printer beds. Its thick construction provides a robust platform with substantial thermal inertia on which to integrate a heater and print surface selected for the machine.
Only the machined plate is supplied. It..
119.99€
Ex Tax:99.17€
-9 %
Discontinued
Stock: Discontinued
Model: MK2A-300x200
12 V MK2A 300 × 200 mm PCB heated bed for 3D printers. This classic solution is intended for RepRap machines, Prusa i3 derivatives and custom projects designed around a rectangular heated platform of this format.
The resistive track built into the PCB heats the print surface to improve first-layer ..
32.99€ 29.99€
Ex Tax:24.79€
-40 %
Stock: In Stock
Model: MK2B
The MK2B 200 × 200 mm heated bed is designed to provide a heated build platform for FDM 3D printers, improving first-layer adhesion and helping reduce warping when printing a wide range of materials.
Its dual-voltage PCB design supports both 12 V and 24 V operation by selecting the appropriate po..
9.99€ 5.99€
Ex Tax:4.95€
-56 %
Stock: In Stock
Model: Mk3 214x214
214 × 214mm MK3 ALU heated bed based on the open RepRap architecture, with a 3mm aluminium core and a circuit selectable for 12 or 24V DC. Its classic format suits many Prusa i3, P3Steel, 3DSteel and other RepRap projects when the carriage, holes and electrical system match.
Four corner positions..
24.99€ 10.90€
Ex Tax:9.01€