Stock: In Stock
Model: Mk3-220x220-12/24v
220 × 220mm MK3 ALU heated bed with a 3mm aluminium core and a heater circuit selectable for 12 or 24V DC. The bare metal face provides a rigid surface while the black underside carries the heater circuit, thermal warnings and connection pads.
Four countersunk mounting holes allow screw heads to ..
11.99€
Ex Tax:9.91€
-20 %
Stock: In Stock
Model: MK3-220x220-12v-C
220 × 220mm MK3 ALU heated bed prepared for 12V operation at approximately 96W. It includes an approximately 90cm harness, power connection and installed thermistor, avoiding the need to solder the main wiring directly to the plate.
The 3mm aluminium core provides rigidity and distributes heat, w..
15.99€ 12.80€
Ex Tax:10.58€
Stock: In Stock
Model: Mk3-220x280-12v
220 × 280mm, 12V MK3 ALU heated bed providing a longer build platform while retaining a declared 209mm corner-hole pattern dimensionally compatible with many RepRap carriages designed around 214 × 214 or 220 × 220mm beds.
The plate has a 3mm aluminium core, four corner holes, one centre hole on e..
19.99€
Ex Tax:16.52€
Stock: In Stock
Model: Mk3-329x329-24V
329 × 329mm MK3 ALU heated bed for 24V systems, with a declared 300 × 300mm effective area. It is intended for large-format printers and custom projects using a 320mm square mounting pattern.
The 3mm aluminium core combines the structural surface and heater circuit. Four corner holes and a front ..
29.99€
Ex Tax:24.79€
Stock: In Stock
Model: Mk3-235x235-24V
MK3 ALU 235 × 235 mm heated bed for 24 V systems, built on a 3 mm aluminium plate and rated at 240 W. Its four countersunk mounting holes allow flat-head screw heads to sit flush with the top surface.
This version is supplied without wires or a fitted thermistor. It provides large connection pads..
13.50€
Ex Tax:11.16€
Stock: In Stock
Model: Mk3-235x235-24V-connection
MK3 ALU 235 × 235 mm heated bed for 24 V systems, built on a 3 mm aluminium plate and rated at 240 W. It has four countersunk holes on a nominal 170 mm mounting pattern and includes an approximately 90 cm detachable connection harness.
This version reduces wiring preparation, but it remains a hig..
16.49€
Ex Tax:13.63€
Out of Stock
Stock: Out of Stock
Model: MK52-24v
MK52-type magnetic heated bed for 24 V systems, with a declared rated power of 180 W, embedded magnets and nine mounting points. It is designed to work with a removable flexible spring-steel sheet, making it easier to change the build surface and release printed parts after cooling.
Its geometry ..
55.99€
Ex Tax:46.27€
Stock: In Stock
Model: Aislante-Térmico
This thermal insulation pad is designed to reduce heat loss from the underside of a heated bed, improving thermal efficiency and helping maintain a more stable printing temperature.
Features
Multi-layer thermal insulation structure.
Reduces heat loss from the heated bed.
Helps ..
1.50€
Ex Tax:1.24€
Stock: In Stock
Model: Adhesive-Foam
Self-adhesive thermal insulation for the underside of a heated bed, combining a foam layer, an aluminium-finished surface and an adhesive backing. Its nominal format suits many square 3D-printer beds, provided that their dimensions, mounting holes and cable position are checked first.
By reducing..
1.95€
Ex Tax:1.61€
Stock: In Stock
Model: Silicona-18mm
Silicone damping spacer for mounting a heated bed on a 3D printer’s Y carriage. Its semi-rigid body maintains the distance between both components while allowing a limited amount of compression for adjustment.
It may replace conventional springs when a less elastic mounting arrangement with reduc..
0.95€
Ex Tax:0.79€
Stock: In Stock
Model: Aislante-Térmico-PET
Flexible thermal insulation designed for installation underneath a 3D printer heated bed. Its three-layer construction helps reduce downward heat loss, contributing to more efficient heating and improved temperature stability.
This is a passive component: it requires no electrical power and may b..
1.19€
Ex Tax:0.98€
Stock: In Stock
Model: Mosfet25A-Modulo
V1.3 external MOSFET module designed to switch a 12 or 24V DC heated bed or another resistive load from a controller board's heater output. The control input is separate from the power terminals and the power transistor has its own heatsink.
It is particularly useful where heated-bed current shou..
2.99€
Ex Tax:2.47€