New
Stock: In Stock
Model: Base-Mec-330
330 × 330 × 8 mm machined cast aluminium plate, designed by HTA3D as a robust foundation for a 3D-printer bed. Its thickness adds rigidity and thermal mass, while the machined countersinks and auxiliary threads allow clean integration into a compatible structure.
This size is used by the assemble..
61.99€
Ex Tax:51.23€
New
Stock: In Stock
Model: Base-Mec-400
400 × 400 × 8 mm machined cast aluminium plate, designed by HTA3D for large-format 3D-printer beds. Its 8 mm thickness provides a robust structure and substantial thermal mass on which to install the heater and print surface required by the project.
This is not a complete heated bed: the supplied..
88.99€
Ex Tax:73.55€
New
Stock: In Stock
Model: Base-Mec-500
500 × 500 × 8 mm machined cast aluminium plate, designed by HTA3D for large-format 3D-printer beds. Its thick construction provides a robust platform with substantial thermal inertia on which to integrate a heater and print surface selected for the machine.
Only the machined plate is supplied. It..
119.99€
Ex Tax:99.17€
-30 %
Stock: In Stock
Model: HTA3D-Extrusor
A direct extruder designed by HTA3D for the HTA3D P3Steel and projects based on the classic Prusa i3 architecture. It combines an MK8 drive for 1.75 mm filament, a close-fitting filament guide and an all-metal V6 hotend. It is a simple, proven solution for maintaining a P3Steel or upgrading an older..
55.99€ 38.99€
Ex Tax:32.22€
-23 %
Stock: In Stock
Model: HTA3D-DUAL-EXTRUDER
The HTA3D dual Bowden extruder for P3Steel combines two independent MK8 drive systems with a two-nozzle Chimera-style hotend to add dual extrusion to a compatible P3Steel. It can print in two colours, combine a model material with a support material, or dedicate each tool to a different filament, pr..
95.00€ 73.50€
Ex Tax:60.74€
Stock: In Stock
Model: HTA3D-V2-Hardware-Set
Hardware set prepared for assembling and servicing the HTA3D V2 extruder. It brings together the M3 and M4 screws, nuts, washers and spring-loaded assembly used throughout the extruder.
It is a convenient way to assemble the printed extruder parts or replace their hardware without sourcing every ..
2.50€
Ex Tax:2.07€
Stock: In Stock
Model: Igus DryLin® RJ4JP 01-08
Igus DryLin RJ4JP-01-08 solid-polymer linear plain bearing made from iglidur J4 for 8 mm shafts. It retains the nominal envelope of an LM8UU —15 mm outside diameter and 24 mm long— while replacing recirculating balls with quiet, dry-running motion that requires no external lubrication.
It is part..
0.99€
Ex Tax:0.82€
Stock: In Stock
Model: Igus DryLin® RJ4JP 01-10
Igus DryLin RJ4JP-01-10 solid-polymer linear plain bearing made from iglidur J4 for 10 mm shafts. It retains the nominal envelope of an LM10UU —19 mm outside diameter and 29 mm long— while replacing recirculating balls with quiet, dry-running motion that requires no external lubrication.
It is pa..
1.19€
Ex Tax:0.98€
Stock: In Stock
Model: Igus DryLin® RJ4JP 01-12
Igus DryLin RJ4JP-01-12 solid-polymer linear plain bearing made from iglidur J4 for 12 mm shafts. It retains the nominal envelope of an LM12UU —21 mm outside diameter and 30 mm long— while replacing recirculating balls with quiet, dry-running motion that requires no external lubrication.
It is pa..
1.49€
Ex Tax:1.23€
Stock: In Stock
Model: Calcetin-TZ-V6
This silicone sock for the TZ-V6 hotend wraps around the hot section to reduce heat loss, limit the direct effect of part-cooling airflow and help keep the block cleaner. It is a replacement part shaped specifically for the TZ-V6 assembly shown in the photographs.
What it adds to the ho..
0.85€
Ex Tax:0.70€
Stock: In Stock
Model: Calcetin-vol
Insulating silicone sock for Volcano-type heater blocks. It wraps around the hot section to reduce heat loss, limit the direct effect of part-cooling airflow and help keep the heater block cleaner.
Main benefits
Thermal insulation: reduces heat loss from the block surface.
Imp..
0.60€
Ex Tax:0.50€
Stock: In Stock
Model: Aislante Silicona Hotend
Silicone sock for the V6 heating block, its main advantages that keeps the nozzle clean and helps maintain temperature.Features:Manufactured from a non-stick silicone material, heat resistant, it will repel the accumulation of molten plastic. What helps with sticky materials and materials that tend ..
0.50€
Ex Tax:0.41€