Stock: In Stock
Model: Cristal bor- 5mm 400x400
400 × 400 × 4.5 mm tempered borosilicate glass plate for use as a rigid print surface over an FDM/FFF 3D printer bed. Its lower thermal expansion compared with conventional glass helps maintain a stable surface through repeated heating and cooling cycles.
The smooth face can produce an even first..
22.75€
Ex Tax:18.80€
Stock: In Stock
Model: Cristal bor- 4.5mm 500x500
500 × 500 × 4.5 mm tempered borosilicate glass plate for use as a rigid print surface over an FDM/FFF 3D printer bed. Its lower thermal expansion compared with conventional glass helps maintain a stable surface through repeated heating and cooling cycles.
The smooth face can produce an even first..
31.75€
Ex Tax:26.24€
Out of Stock
Stock: Out of Stock
Model: TFT50-BTT
Very versatile graphic display, as it can be connected in two ways at the same time:It can be connected as an external screen, using the pins TX and RX (black cable) so that you have the touch menu. This connection can be used to decrease the load on the processor.You can connect the two flat cables..
75.99€
Ex Tax:62.80€
Stock: In Stock
Model: HGX-Lite
HGX Lite 9.5:1 extruder without motor for 1.75 mm filament
The HGX Lite is a compact geared extruder for 1.75 mm filament, intended for direct-drive configurations where low toolhead mass and firm filament control are important. Its metal body weighs approximately 76 g and combines an advertised ..
28.50€
Ex Tax:23.55€
Stock: In Stock
Model: Sensor-Prox-V
Three-wire TL-Q5MC2-type inductive proximity sensor with an NPN normally-closed output and a nominal sensing distance of 5mm. It detects metal surfaces without physical contact and may be used as a fixed probe in 3D printers, CNC machines and automation systems.
This format has traditionally been..
4.75€
Ex Tax:3.93€
New
Stock: In Stock
Model: ISO-7380-Tornillo
Tornillo de cabeza hexagonal DIN 933 / ISO 4017, fabricado en acero de clase 8.8, con acabado negro pavonado y rosca métrica completa.
Es una solución robusta y versátil para estructuras, maquinaria, impresoras 3D, máquinas CNC, soportes y conjuntos mecánicos que requieran un tornillo totalmente ..
0.00€
Ex Tax:0.00€
Out of Stock
Stock: Out of Stock
Model: Teflón-4-2-trans
Translucent PTFE tube with a 2 mm inside diameter and 4 mm outside diameter for guiding 1.75 mm filament. This is a common size for Bowden systems and other feed paths using fittings designed for 4 mm tubing. PTFE's low-friction surface helps filament move smoothly when the route and connections are..
1.70€
Ex Tax:1.41€
Stock: In Stock
Model: Termistor 104GT-2
High-precision Trianglelab thermistor cartridge built around a Semitec 104NT-4-R025H42G sensor, also identified as 104GT-2. It includes mechanical protection, high-temperature wiring and a 1 metre extension for installation in a compatible hotend.
Features
100K Semitec 104NT-4-R025H42G sensor wi..
3.89€
Ex Tax:3.21€
Stock: In Stock
Model: Resistencia-ceramica-ACE
Original Trianglelab 24 V, 105 W nominal ceramic heating element, designed as a replacement for the Dragon ACE hotend. Its flat format transfers heat directly to the heater block and allows replacement without completely disassembling the hotend.
The version currently supplied corresponds to Tria..
10.25€
Ex Tax:8.47€
Out of Stock
Stock: Out of Stock
Model: SensorTemp-PT1000
Trianglelab PT1000 RTD temperature sensor for 3D printers and high-temperature hotends. Its 3 mm cylindrical capsule fits compatible heater blocks, while its higher nominal resistance allows direct reading by certain controller boards without necessarily requiring an amplifier.
Features
Sensor t..
11.45€
Ex Tax:9.46€
Stock: In Stock
Model: PT100-4wire
Trianglelab four-wire PT100 RTD sensor for accurate temperature measurement in compatible hotends and thermal systems. Its four-conductor connection allows cable resistance to be compensated when used with an interface supporting this measurement method.
Features
Sensor type: PT100 RTD.
Detacha..
13.99€
Ex Tax:11.56€
Stock: In Stock
Model: CHC-b3950-24V
Trianglelab 24 V CHC ceramic heater core with an integrated NTC 100K B3950 thermistor. It replaces the separate block, heater cartridge and sensor with a compact assembly that heats in a ring around the melt zone. It is particularly useful for compatible V6 assemblies and conversions where low volum..
19.50€
Ex Tax:16.12€