Stock: In Stock
Model: Extender-Melt-zone
Trianglelab ZS-MZE melt zone extender for hotends with a compatible V6 nozzle interface. It fits between the heater block and nozzle, extending the heated filament path by approximately 8.4 mm to increase the hotend's potential melting capacity.
It is CNC-machined from a nickel-plated copper allo..
6.99€
Ex Tax:5.78€
Stock: In Stock
Model: Aislante-Térmico-PET
Flexible thermal insulation designed for installation underneath a 3D printer heated bed. Its three-layer construction helps reduce downward heat loss, contributing to more efficient heating and improved temperature stability.
This is a passive component: it requires no electrical power and may b..
1.19€
Ex Tax:0.98€
Stock: In Stock
Model: Metal-Hotend-TZ-X-P
TZ 2.0 all-metal hotend for Bambu Lab X1, X1C, P1P and P1S, designed as an alternative to the original integrated hotend body. Its main service advantage is a threaded replaceable nozzle: if the nozzle becomes worn or damaged, it can be changed without replacing the complete hotend body.
The asse..
14.90€
Ex Tax:12.31€
Out of Stock
Stock: Out of Stock
Model: TZ-V6-2.0
Compact TZ-V6 2.0 hotend for 1.75 mm filament, designed for 24 V systems with a 48 W ceramic heater and a Semitec 104NT-4 thermistor. The assembly combines a lightweight heatsink, titanium heatbreak, nickel-plated chromium-zirconium copper block and a hardened-steel TZ-V6 nozzle with a 0.4 mm outlet..
14.25€
Ex Tax:11.78€
Only a few units in stock
-58 %
Stock: In Stock
Model: U604ZZ U-Groove Bearing
The U604ZZ U-Groove bearing is designed for applications requiring the guidance of belts, cables, rods or other cylindrical elements. Its U-shaped groove and double metal shields (ZZ) provide smooth operation while helping protect the bearing from dust and debris.
Features
U-Groove beari..
1.50€ 0.63€
Ex Tax:0.52€
Stock: In Stock
Model: LED-lamp
Ultra-thin, circular and dimmable USB LED lamp with three selectable light tones: warm, neutral and cool. Its compact format and in-line controller make it suitable for illuminating lamps, shades and decorative objects printed in translucent filament, as well as providing auxiliary light for a 3D pr..
5.99€
Ex Tax:4.95€
Stock: In Stock
Model: Extensor-USB-2.0
USB 2.0 extension cable approximately 30cm long, with a USB Type-A male connector at one end and a panel-mount USB Type-A female socket at the other.
It moves an internal USB port to the outside of an enclosure, cover or control panel, providing access without opening the electronics compartment...
1.40€
Ex Tax:1.16€
Stock: In Stock
Model: Espaciador-Excentrica-V
Eccentric spacer for adjusting wheel preload in V-Slot motion systems. Its off-centre bore slightly changes the axle position when the hexagonal body is rotated, moving the wheel closer to or farther away from the profile.
This adjustment helps remove carriage play without repositioning the wheel..
0.25€
Ex Tax:0.21€
-44 %
Stock: In Stock
Model: Hotend-V6-1.75mm
The V6 All Metal Hotend is designed for FDM 3D printers using 1.75 mm filament. Its all-metal construction eliminates the need for PTFE components inside the hot zone, allowing compatibility with a wide range of printing materials while providing excellent durability and easy maintenance.
Feature..
30.00€ 16.95€
Ex Tax:14.01€
Stock: In Stock
Model: V6-Titanium-throat
All-metal titanium heatbreak for building or repairing V6-style hotends. It has an M7 × 1 thread for the heatsink, an M6 × 1 thread for the heater block and a 2mm bore for 1.75mm filament.As PTFE does not extend into the hot zone, it is suitable for all-metal assemblies. Titanium limits heat transfe..
5.56€
Ex Tax:4.60€
Stock: In Stock
Model: V6-Heatsink-Remote
This V6 heatsink is designed for Bowden extrusion systems compatible with V6 hotends. Its internal bore allows the PTFE tube to extend down to the heatbreak, reducing unsupported filament length and promoting more stable filament feeding.
Features
Compatible with V6 hotends.
Designe..
1.35€
Ex Tax:1.12€
Stock: In Stock
Model: Nozzle-coated-0.3
V6-style brass nozzle for 1.75 mm filament, with a nominal 0.3 mm outlet and an external non-stick coating. Its smaller outlet is intended for small parts, lettering, fine contours and details that a 0.4 mm nozzle cannot reproduce as easily.
The dark finish covers the outer cone and hex to help r..
2.29€
Ex Tax:1.89€