Only a few units in stock
-9 %
Stock: In Stock
Model: PLA-SILK-Tricolor-1.75mm
At Winkle, they have created the 3D filament with the greatest visual impact on the market.
PLA Silk Tricolor is a filament that delivers spectacular results in terms of quality and appearance. It is perfect for decorative applications, as it combines three tones along the spool, achiev..
22.50€ 20.39€
Ex Tax:16.85€
Stock: In Stock
Model: PLA-Filtory3D
Filtory 3D 1.75mm PLA filament supplied on a 1kg spool and manufactured in Huesca, Spain. It is easy to print, solidifies quickly and has low warping, making it suitable for beginners, decorative models, prototypes, mock-ups and general-purpose parts.
Filtory 3D is the continuation of the filamen..
14.99€
Ex Tax:12.39€
Stock: In Stock
Model: PLA+ Bright GST3D
GST3D Bright PLA+ 1.75 mm combines intense colours with a glossy finish for high-impact visual parts. It is particularly suitable for decorations, visual signage, cosplay, accessories, lettering, figures and presentation prototypes.
GST3D currently groups these Bright finishes within its PLA+ Space..
12.99€
Ex Tax:10.74€
Stock: In Stock
Model: PLA+ Fluo GST3D
GST3D Fluorescent PLA+ 1.75 mm is intended for parts that should attract attention: visual signage, accessories, decorations, cosplay, toys, prototypes and easy-to-find items. It is supplied on a 1 kg spool in Fluorescent Orange or Fluorescent Green.
Its colours are particularly vivid and react str..
13.40€
Ex Tax:11.07€
Stock: In Stock
Model: PLA+ Especiales GST3D
GST3D Marble PLA+ 1.75 mm creates a light finish with small dark speckles that visually resembles stone. The pattern helps disguise layer lines and adds interest to busts, sculptures, planters, vases, bases, architectural models and decorative parts.
The name describes its visual effect: it should ..
12.75€
Ex Tax:10.54€
FLASH
-11 %
Stock: In Stock
Model: PLA+ GST3D
GST3D PLA+ 1.75 mm filament is a versatile choice for general-purpose 3D printing: visual prototypes, models, decorations, organisers, housings and everyday parts that will not operate at high temperatures. It is supplied on a 1 kg spool in a broad selection of colours.
Compared with the special fi..
12.75€ 11.35€
Ex Tax:9.38€
Stock: In Stock
Model: PLA+ Silk GST3D
GST3D Silk PLA+ 1.75 mm is designed for decorative prints with a glossy, smooth and pearlescent finish. It suits figures, vases, cosplay, trophies, lettering, models, gifts and visual prototypes where appearance is the priority.
The silk effect highlights curves and reflects light differently accor..
15.15€
Ex Tax:12.52€
-48 %
Stock: In Stock
Model: PLAHD-Particles-1.75mm
This filament includes particles in its composition, so it is recommended to use 0.6mm nozzles or higher.CHARACTERISTICS: It is a filament manufactured in Spain for 3D printers with FFF/FDM technology. PLA is a biodegradable plastic obtained from natural resources from starch extracted fr..
10.50€ 5.50€
Ex Tax:4.55€
Only a few units in stock
-7 %
Stock: In Stock
Model: Recreus-PLA-LW
Recreus PLA-LW black 1.75 mm — lightweight foaming PLA — 750 g
Recreus PLA-LW is a PLA filament with active foaming technology, developed and manufactured in Spain for printing large-volume parts at a lower density. Once the material is heated above its activation point, it expands inside the ext..
39.90€ 36.99€
Ex Tax:30.57€
Stock: In Stock
Model: PLA-3D700-1.75mm-SAKATA3D
Sakata 3D Ingeo 3D700 PLA filament is manufactured in Spain from a NatureWorks raw material specifically developed to reduce shrinkage and warping in large-format 3D printing. It comes as a 2.5kg spool with a nominal 1.75mm diameter, a format intended for large parts, extended production runs and jo..
39.95€
Ex Tax:33.02€
Stock: In Stock
Model: FLUOR-PLA-3D850-1.75mm-SAKATA3D
Sakata 3D PLA 850 Fluor is a filament made in Spain from NatureWorks Ingeo 3D850 and a selection of particularly vivid colours. It retains the easy printing, low shrinkage and detail of the PLA 850 family, with a strong visual presence for signs, decoration, cosplay, models and parts that need to st..
17.25€
Ex Tax:14.26€
-30 %
Stock: In Stock
Model: GLASS-PLA-3D850-1.75mm-SAKATA3D
Sakata 3D PLA 850 GLASS is a translucent filament made in Spain from NatureWorks Ingeo 3D850. It combines the easy printing and low shrinkage of a technical PLA with colours that transmit and diffuse part of the light, making it particularly useful for lamps, shades, signs and illuminated decorative..
25.75€ 17.99€
Ex Tax:14.87€