GDSTIME 6020 24V Hydraulic Bearing Axial Fan with 25 cm Cable

GDSTIME 6020 24V axial fan with a hydraulic bearing, a 2-pin XH2.54 connector and an approximately 25 cm cable. Its 60 × 60 × 20 mm format provides direct airflow for cooling electronics, power supplies, heatsinks and machine enclosures.

The hydraulic bearing is intended to provide smooth operation and reduced wear in general-purpose or continuous-cooling applications.

Key features

• Brand: GDSTIME.
• Model: GDA6020.
• Type: brushless axial fan.
• Nominal format: 6020.
• Dimensions: 60 × 60 × 20 mm.
• Rated voltage: 24V DC.
• Rated current: 0.10A ±10%.
• Rated speed: 4500 RPM.
• Rated airflow: 26.2 CFM.
• Rated noise level: 34.3 dBA ±10%.
• Hydraulic bearing.
• 2-pin XH2.54 connector.
• Approximate cable length: 25 cm.

Applications

• Cooling electronic boards and controllers.
• Power-supply ventilation.
• Air circulation in 3D-printer enclosures.
• CNC machines, robotics and automation.
• 24V equipment accommodating a 20 mm thick fan.

Compatibility

It can be used in equipment designed for 6020 24V axial fans, provided that the dimensions, mounting pattern, connector, polarity and output current capacity all match.

It is not a direct dimensional replacement for a 6010 or 6015 fan where the bracket only accommodates a 10 or 15 mm thickness. The additional depth may be useful against heatsinks, grilles or moderate restrictions, although final performance depends on the complete assembly.

For 12V systems, see the GDSTIME 6020 12V hydraulic-bearing axial fan. Where a 24V machine has operating conditions that justify a construction intended for more demanding use, consider the GDSTIME 6020 dual ball bearing fan.

Hydraulic or ball bearing

The hydraulic version provides a suitable solution for general cooling and many continuous-operation applications. The dual ball bearing version may be more appropriate for equipment subject to extended operating hours, elevated temperatures or certain mounting orientations.

Selection should be based on the actual operating conditions. Neither version should be described as better in every case, as speed, airflow and noise may also differ.

Installation and speed control

Confirm that the output supplies 24V and supports the required operating and starting current. Check the polarity before connection even if the XH2.54 connector fits physically.

When using PWM control, configure a minimum setting that guarantees startup. After installation, check the airflow direction and ensure that no component or cable interferes with the blades.

Package contents

• 1 × GDSTIME 6020 24V hydraulic-bearing axial fan with an approximately 25 cm cable.