- Stock: 266
- Model: Pie D50-M8-50
Adjustable levelling foot for supporting and setting the height of 3D printers, CNC machines, frames, tables and mechanical structures. It features a Ø50 mm base and an M8 threaded stud 50 mm long.
Height is adjusted by screwing the stud into a compatible support. Its wide base helps distribute the load, while the textured lower surface improves grip on firm, level floors and worktops.
Main features
- Adjustable foot for levelling machines and structures.
- Nominal base diameter: 50 mm.
- External thread: M8.
- Nominal threaded-stud length: 50 mm.
- Reinforced Nylon base.
- Steel threaded stud.
- Textured anti-slip lower surface.
- Sold individually.
Nominal dimensions
| Feature | Nominal value |
|---|---|
| Base diameter | 50 mm |
| External thread | M8 |
| Stud length | 50 mm |
| Base material | Reinforced Nylon |
| Stud material | Steel |
Typical applications
- Levelling 3D printers and enclosures.
- CNC machines and small manufacturing equipment.
- Aluminium-profile structures.
- Workbenches, machine bases and frames.
- Technical cabinets and machinery enclosures.
- Equipment installed on slightly uneven surfaces.
Compatibility
The structure must provide a suitable M8 female thread, a securely retained M8 nut or a dedicated levelling-foot bracket. The use of aluminium profiles does not automatically mean that the stud can be screwed directly into the profile.
Before ordering, check the mounting thread, clearance for the Ø50 mm base, required adjustment length, number of supporting points and strength of the mounting bracket.
Installation and levelling
- Fit one foot at every support point specified by the structure.
- Keep sufficient thread engaged inside each mounting point.
- Place the machine on a firm surface.
- Adjust each foot progressively until rocking is eliminated.
- Check the level in both directions.
- Lock the adjustment with a suitable locknut where permitted by the design.
- Recheck stability after the first operating cycles.
Avoid extending the stud farther than necessary, as reducing thread engagement can lower the rigidity of the assembly.
Levelling foot or vibration-damping foot?
This model is primarily intended to adjust height and stabilise a structure. Where the machine is already level and requires a compact resilient support, consider the M6 female-thread vibration-damping rubber foot, provided its dimensions and mounting system are suitable.
The two products are not direct replacements: their thread, height, geometry and primary functions differ.
Limitations
No maximum load rating is specified. For heavy machinery, critical structures or equipment exposed to impacts, verify the load per foot, threaded-stud strength, mounting bracket and overall stability.
Package contents
- 1 × levelling foot with Ø50 mm base and M8 × 50 mm threaded stud.
