2-Way Corner Connector for 15 Series Aluminium Profiles, 15 × 15 × 19.4 mm

Two-way corner connector designed to join two 15 series aluminium profiles at a 90° angle. Its compact design secures the profiles through their ends without occupying the external slots with a conventional bracket.

The oval opening provides access to the inside of the connector for inserting and tightening the fasteners.

Features

• Type: 2-way corner connector.
• Material: aluminium alloy.
• Approximate dimensions: 15 × 15 × 19.4 mm.
• Oval access opening: approximately 7.2 × 9.8 mm.
• Circular holes: approximately 4 mm in diameter.
• Joint angle: 90°.
• Contents: 1 connector.

Compatibility

Compatible with the HTA3D 1515 aluminium profile and accessories from the 15 series in our catalogue.

For 1515 profiles from other manufacturers, check the internal section, central end bore and fastening system. The external 15 × 15 mm dimensions alone do not guarantee compatibility.

Installation

The connector is positioned between the ends of two perpendicular profiles. The front opening provides access to the screws securing both profiles.

The central holes in the profile ends may require tapping or machining before installation. Check the required thread and screw length before beginning assembly.

Typical applications

• Small frame corners.
• Electronics boxes and enclosures.
• Compact automation and robotics structures.
• Modular frames made from 15 series profiles.

To join three perpendicular profiles at a single vertex, use the 3-way cube corner connector for 15 series profiles.

The final rigidity will depend on the profiles, fasteners, profile-end tapping and the complete structure configuration.