3-Way Cube Corner Connector for 15 Series Aluminium Profiles, 15 × 15 × 15 mm

Three-way cube connector designed to join the ends of three 15 series aluminium profiles at a corner. It positions the profiles along three perpendicular axes, allowing compact frames, enclosures and small three-dimensional structures to be assembled.

Its openings provide access to the internal fasteners during installation. The 15 mm format is matched to the dimensions of HTA3D profiles from this series.

Features

• Type: 3-way cube corner connector.
• Material: aluminium alloy.
• Approximate dimensions: 15 × 15 × 15 mm.
• External access openings: approximately 7 mm.
• Internal fastening passages: approximately 4.2 mm.
• Joins three profiles along three perpendicular axes.
• Contents: 1 connector.

Compatibility

Compatible with the HTA3D 1515 aluminium profile and accessories from the same series in our catalogue.

The 15 series has its own geometry and must not be confused with the 20 or 30 series. For 1515 profiles from other manufacturers, check their internal cavities, central end bore and required fasteners.

Installation

The three profiles are positioned against three perpendicular faces of the block. Fasteners are inserted through the access openings and tightened into the profile ends.

Depending on the profile preparation, its central bore may require tapping or machining before assembly. Check the thread and screw length before final installation.

Typical applications

• Lightweight frames and compact structures.
• Electronics boxes and enclosures.
• Small automation and robotics projects.
• Three-dimensional structure vertices made from 15 series profiles.

For a corner formed by only two profiles, use the 2-way corner connector for 15 series profiles.

The joint rigidity will depend on the profiles, fasteners, profile-end preparation and applied loads.