- Stock: 177
- Model: conector esquina 3 conexiones - 3030
Modelo:
2020
3030
Internal three-way corner connector designed to join three 30 series aluminium profiles in a three-dimensional structure. It fits inside the profile slots, allowing three perpendicular profiles to be connected without using an external corner cube.
The connector is manufactured from zinc alloy and features M6 threaded fixing points. It is suitable for frames, enclosures, supports, 3D printers, CNC machines and automation projects.
Main features
- Internal corner connector for three aluminium profiles.
- Compatible with HTA3D 30 series aluminium profiles.
- Fits inside the profile slots.
- Zinc alloy construction.
- M6 fixing threads.
- Includes four M6 grub screws.
- Creates a three-way 90° connection.
- Compact installation without an external cube protruding from the profile ends.
Dimensional drawing
The following image shows the connector geometry and dimensional references. All values listed in the table are expressed in millimetres.
| Drawing reference | Dimension |
|---|---|
| A | 30 mm |
| B | 25 mm |
| C | 55 mm |
| D | 16 mm |
| E | 8 mm |
| F | 10 mm |
| G | 2 mm |
| H | 4 mm |
| W | 6 mm |
| Thread | M6 |
Compatibility
Compatible with the 30 series profiles and accessories available from HTA3D, including the 3030 aluminium profile and the 3060 aluminium profile.
It may also fit other 30 series profiles with an equivalent slot geometry. When using profiles from other manufacturers, check the internal slot dimensions because apparently similar extrusion systems may have different geometries.
Installation
Insert the three arms of the connector into the slots of the profiles forming the corner. Once the profiles are correctly aligned, gradually tighten the grub screws to secure the joint.
For accurate alignment, initially tighten the screws lightly, check that the profiles are square and then complete the tightening process progressively. The final strength will also depend on profile length, applied loads and the overall structure design.
Typical applications
- 3D printer and CNC machine frames.
- Machine frames and enclosures.
- Technical workbenches and supports.
- Robotics and automation projects.
- Modular structures made from 30 series aluminium profiles.
