Menu
Your Cart

V6 Stainless Steel All Metal Heatbreak with M6/M7 Thread for 1.75 mm Filament

V6 Stainless Steel All Metal Heatbreak with M6/M7 Thread for 1.75 mm Filament
V6 Stainless Steel All Metal Heatbreak with M6/M7 Thread for 1.75 mm Filament
V6 Stainless Steel All Metal Heatbreak with M6/M7 Thread for 1.75 mm Filament
V6 Stainless Steel All Metal Heatbreak with M6/M7 Thread for 1.75 mm Filament
V6 Stainless Steel All Metal Heatbreak with M6/M7 Thread for 1.75 mm Filament
V6 Stainless Steel All Metal Heatbreak with M6/M7 Thread for 1.75 mm Filament
V6 Stainless Steel All Metal Heatbreak with M6/M7 Thread for 1.75 mm Filament
V6 Stainless Steel All Metal Heatbreak with M6/M7 Thread for 1.75 mm Filament
V6 Stainless Steel All Metal Heatbreak with M6/M7 Thread for 1.75 mm Filament
V6 Stainless Steel All Metal Heatbreak with M6/M7 Thread for 1.75 mm Filament
V6 Stainless Steel All Metal Heatbreak with M6/M7 Thread for 1.75 mm Filament
15 reviews - Write a review
1.99€
Ex Tax: 1.64€
10 or more 1.70€
50 or more 1.20€
  • Stock: 291
  • Model: V6-316L-Throat

Model:

DI 4.1

DI 4.1

All Metal

All Metal

Bimetal

Bimetal

Titanium

Titanium

Bimetal - high quality

Bimetal - high quality

Add to Cart
Buy Now
Add to Wish List
Fast shipping from Spain
Delivery from 24 hours and free shipping available in mainland Spain.
Stock on hand
Shipped quickly from Spain, with a full VAT invoice.
Secure & flexible payment
Pay by card, PayPal or bank transfer.
Expert technical support
Over 10 years helping customers with components and compatibility.

This stainless steel all-metal heatbreak is designed for hotends compatible with the V6 standard. Its thin transition section creates an efficient thermal barrier between the heatsink and the heater block, helping maintain stable filament melting while reducing heat transfer to the cold side of the hotend.

Features

  • All-metal heatbreak compatible with V6 hotends.
  • Manufactured from stainless steel.
  • M7 upper thread and M6 lower thread.
  • Designed for 1.75 mm filament.
  • Optimized transition zone for effective thermal isolation.

Technical Specifications

  • Type: All-metal heatbreak.
  • Material: Stainless steel.
  • Upper thread: M7.
  • Lower thread: M6.
  • Compatible with 1.75 mm filament.

Compatibility

Compatible with hotends using the V6 standard with an M7 thread on the heatsink side and an M6 thread on the heater block side.

Package Contents

  • 1 × V6 stainless steel all-metal heatbreak.

Write a review

Note: HTML is not translated!
Bad Good
Captcha
Tags: barrels, spares, for, hotend
Check out this bundle
Standard all-metal hotend v6 all-metal parts
..
Nozzle for V5/V6 Compatible Hotends – 1.75 mm Filament (0.20 mm to 1.00 mm)
Nozzle for V5/V6 Compatible Hotends – 1.75 mm Filament (0.20 mm to 1.00 mm)
0.39€
+
V6 Heater Block for 3 mm Encapsulated Sensors, M6 Thread
V6 Heater Block for 3 mm Encapsulated Sensors, M6 Thread
0.90€
+
V6 Stainless Steel All Metal Heatbreak with M6/M7 Thread for 1.75 mm Filament
V6 Stainless Steel All Metal Heatbreak with M6/M7 Thread for 1.75 mm Filament
1.99€
+
V6 Bowden Heatsink with M7 Thread and PTFE Tube Guide
V6 Bowden Heatsink with M7 Thread and PTFE Tube Guide
1.35€
+
BSP PC4-01 Through Bowden Connector for 4 mm PTFE Tube and 1.75 mm Filament
BSP PC4-01 Through Bowden Connector for 4 mm PTFE Tube and 1.75 mm Filament
0.40€
Bundle price: 4.78€
You save 0.25€!

Add bundle to Cart
Quickview
V6 All Metal Hotend for 1.75 mm Filament
-44 %
V6 All Metal Hotend for 1.75 mm Filament
The V6 All Metal Hotend is designed for FDM 3D printers using 1.75 mm filament. Its all-metal construction eliminates the need for PTFE components ins..
30.00€ 16.95€ Ex Tax:14.01€
Add to Cart
Add to Wish List
Quickview
Nozzle for V5/V6 Compatible Hotends – 1.75 mm Filament (0.20 mm to 1.00 mm)
Nozzle for V5/V6 Compatible Hotends – 1.75 mm Filament (0.20 mm to 1.00 mm)
This brass nozzle is designed for hotends compatible with 1.75 mm filament. Its precision machining promotes smooth material flow and consistent extru..
0.39€ Ex Tax:0.32€
Add to Cart
Add to Wish List
Quickview
V6 Heater Block with M6 Thread Compatible with V5 and V6 Hotends
V6 Heater Block with M6 Thread Compatible with V5 and V6 Hotends
V6-format heater block designed to secure the heater cartridge and thermistor using independent clamping systems. This configuration provides stable i..
0.60€ Ex Tax:0.50€
Add to Cart
Add to Wish List
Quickview
V6 Heatsink with All Metal Heatbreak for Bowden Extrusion
V6 Heatsink with All Metal Heatbreak for Bowden Extrusion
This V6 heatsink features an integrated all-metal heatbreak and is designed for Bowden extrusion systems compatible with V5 and V6 hotends. Its compac..
2.90€ Ex Tax:2.40€
Add to Cart
Add to Wish List
Quickview
V6 PTFE-Lined Heatbreak with M6/M7 Thread for 1.75 mm Filament
V6 PTFE-Lined Heatbreak with M6/M7 Thread for 1.75 mm Filament
This stainless steel V6 heatbreak features an internal PTFE liner, allowing the PTFE tube to extend down to the top of the nozzle. It is designed for ..
1.99€ Ex Tax:1.64€
Add to Cart
Add to Wish List
Quickview
V6 Bowden Heatsink with M7 Thread and PTFE Tube Guide
V6 Bowden Heatsink with M7 Thread and PTFE Tube Guide
This V6 heatsink is designed for Bowden extrusion systems compatible with V6 hotends. Its internal bore allows the PTFE tube to extend down to the hea..
1.35€ Ex Tax:1.12€
Add to Cart
Add to Wish List
Quickview
V6 Heatsink with Integrated PTFE-Lined Heatbreak and M6 Thread for Bowden Extrusion
V6 Heatsink with Integrated PTFE-Lined Heatbreak and M6 Thread for Bowden Extrusion
This V6 heatsink features an integrated PTFE-lined heatbreak, allowing the PTFE tube to extend down to the top of the nozzle. Designed for Bowden extr..
2.90€ Ex Tax:2.40€
Add to Cart
Add to Wish List
Quickview
0.4 mm tri-metal integrated nozzle for Creality K1C, Ender-3 V3 and V3 Plus
0.4 mm tri-metal integrated nozzle for Creality K1C, Ender-3 V3 and V3 Plus
Integrated 0.4 mm nozzle and heatbreak for Creality printers fitted with the Unicorn-format hotend. Its 65.4 mm geometry matches the system used on K1..
8.25€ Ex Tax:6.82€
Add to Cart
Add to Wish List
Quickview
60 W ceramic hotend kit for Creality K1 and K1 Max — 0.4 mm nozzle
60 W ceramic hotend kit for Creality K1 and K1 Max — 0.4 mm nozzle
60 W ceramic hotend kit for replacing the heating and melt-zone assembly on Creality K1 and K1 Max printers fitted with the matching earlier-generatio..
11.60€ Ex Tax:9.59€
Add to Cart
Add to Wish List
Quickview
All-metal M6 Ø7 mm heatbreak for dual V6 hotend
All-metal M6 Ø7 mm heatbreak for dual V6 hotend
This stainless-steel all-metal heatbreak is designed for dual hotends using a 7 mm smooth mounting section and an M6 threaded connection to the heater..
3.99€ Ex Tax:3.30€
Add to Cart
Add to Wish List
Quickview
Hotend heater block kit for Anycubic Kobra 3 - 0.4 mm nozzle
Out of Stock
Hotend heater block kit for Anycubic Kobra 3 - 0.4 mm nozzle
Replacement assembly for the hotend fitted to the Anycubic Kobra 3 and Kobra 3 Combo. It is supplied assembled with a heater block, heater cartridge, ..
12.70€ Ex Tax:10.50€
Add to Cart
Add to Wish List
Quickview
M6 Ø7 mm PTFE-lined heatbreak for dual hotend
M6 Ø7 mm PTFE-lined heatbreak for dual hotend
This stainless-steel heatbreak is designed for dual hotends using a 7 mm smooth mounting section and an M6 threaded connection to the heater block. It..
3.99€ Ex Tax:3.30€
Add to Cart
Add to Wish List
Quickview
M6/Ø7mm All-Metal Bimetal Heatbreak for 1.75mm Dual V6 Hotends
M6/Ø7mm All-Metal Bimetal Heatbreak for 1.75mm Dual V6 Hotends
Bimetal all-metal heatbreak for dual V6-style hotends, with an M6 × 1 thread for the heater block and a smooth Ø6.95mm upper body for retention in a h..
3.20€ Ex Tax:2.64€
Add to Cart
Add to Wish List
Quickview
Trianglelab Kraken All-Metal Titanium M6/Ø7mm Heatbreak for Dual Hotends
Trianglelab Kraken All-Metal Titanium M6/Ø7mm Heatbreak for Dual Hotends
Trianglelab Kraken all-metal heatbreak manufactured from titanium alloy for 1.75mm filament. It uses a smooth 7mm cold-side body and a hot-side M6 thr..
5.99€ Ex Tax:4.95€
Add to Cart
Add to Wish List

Related Posts

How to Change the Nozzle
Fátima 14 Sep 0 15859
How to Change the Nozzle
Our 3D printer, as every machine, needs a maintenance. One of the most basic ones is the change of the nozzle of our hotend. We may need to change it for several reasons, as for example, needing a smaller or bigger diameter (as bigger diameters are better for resistent parts with few details and fast printings and small diameters are better for sma..
Read More