6015 24V Ball Bearing Axial Fan with 15 cm Cable

6015 24V axial fan with a ball bearing system and a 15 cm cable. Its nominal 60 × 60 × 15 mm dimensions make it suitable for cooling electronics, power supplies and enclosures used in 3D printers or CNC machines.

The ball bearing system is particularly suitable for equipment subject to extended operation, elevated temperatures or mounting positions where reduced wear is preferred over a basic fan.

Key features

• Type: brushless axial fan.
• Nominal format: 6015.
• Dimensions: 60 × 60 × 15 mm.
• Rated voltage: 24V DC.
• Stated rated power: 1.2W.
• Rated speed: 4500 RPM.
• Rated airflow: 28 CFM.
• Rated noise level: 28 dBA.
• Ball bearing system.
• Two-wire connection.
• Approximate cable length: 15 cm.

Applications

• Cooling electronic boards and controllers.
• Power-supply ventilation.
• 3D-printer and CNC-machine enclosures.
• Frequently or continuously operated equipment.

Compatibility

It can be used as a replacement or upgrade in assemblies designed for 6015 24V axial fans. Dimensions, mounting-hole pattern, connector, polarity and output capacity must all be checked.

Its speed and airflow may be higher than those of some standard 6015 versions. This can improve cooling but may also alter noise and air movement inside the equipment.

For a more moderate 24V alternative, see the standard 6015 axial fan. For 12V installations, see the GDSTIME 6015 hydraulic-bearing fan.

Installation

Confirm that the output supplies 24V and supports the fan's operating and starting current. Always check the polarity before connection.

When using PWM control, configure a minimum setting that guarantees startup. After installation, check the airflow direction and ensure that no component or cable can contact the blades.

Package contents

• 1 × 6015 24V ball bearing axial fan with 15 cm cable.