Out of Stock
Stock: Out of Stock
Model: PSU-24v21A500W
AC/DC switching power supply with a 24 V output, maximum nominal current of 20 A and rated power of 480 W. It is intended for 3D printers, CNC equipment, automation and other high-consumption 24 V systems with several heaters and motors operating simultaneously.
Electrical specifications
Outpu..
24.99€
Ex Tax:20.65€
Stock: In Stock
Model: PSU-24v25A600W
High-power switching supply with a 24 V output, maximum nominal current of 25 A and 600 W capacity. Its extruded aluminium enclosure assists heat dissipation and protects the circuit, while an integrated fan provides active cooling.
Specifications
Output voltage: 24 V DC.
Maximum nominal curr..
36.50€
Ex Tax:30.17€
Stock: In Stock
Model: PSU-24v33A800W
High-power 24 V switching power supply for electrical systems with substantial current requirements. The unit label specifies a maximum current of approximately 33.3 A, equivalent to about 800 W, with an extruded aluminium enclosure and active cooling.
Specifications
Output voltage: 24 V DC.
..
54.50€
Ex Tax:45.04€
Stock: In Stock
Model: Resistencia 24V 40W
24 V, 40 W cylindrical heater cartridge for hotend blocks with a nominal 6 mm heater bore. This configuration is widely used in 24 V V6-style hotends and is suitable as a replacement when dimensions, voltage, power, cable length and electrical connection all match.
The cartridge has a metal sheat..
0.95€
Ex Tax:0.79€
Stock: In Stock
Model: ResistenciaPlana-24V-48W
flat ceramic heater rated for 24 V and a nominal 48 W, designed as a compatible replacement for Bambu Lab X1 and X1 Carbon hotends. It can replace a damaged heater while retaining the electrical specification and architecture of the original hotend assembly.
This is a compatible replacement manuf..
5.80€
Ex Tax:4.79€
Stock: In Stock
Model: Resistencia 24V 50W
24 V, 50 W cylindrical heater cartridge for hotend blocks with a nominal 6 mm heater bore. Its power rating is suitable for extrusion systems designed or properly adapted to control a 50 W load.
It can be used as a replacement or for a custom hotend assembly, but it must not be treated as a direc..
1.75€
Ex Tax:1.45€
Stock: In Stock
Model: Resistencia 24V 60W
24 V, 60 W heater cartridge for hotend blocks with a cylindrical Ø6 mm bore. Its 6 × 20 mm body and 1 metre cable make it suitable as a replacement or for custom assemblies that are mechanically, electrically and thermally designed for this power level.
Compared with a common lower-power cartridg..
3.50€
Ex Tax:2.89€
Out of Stock
Stock: Out of Stock
Model: Resistencia 24V 70W
24 V, 70 W heater cartridge for hotend blocks with a cylindrical Ø6 mm bore. This high-power variant is intended for systems that can both use and safely handle it: before replacing a 40 or 60 W heater, check the controller output, power supply, terminals, wiring, sensor, block and thermal configura..
3.50€
Ex Tax:2.89€
Out of Stock
Stock: Out of Stock
Model: Resistencia 24V 80W
24 V, 80 W heater cartridge for hotend blocks with a cylindrical Ø6 mm bore. Its high power may shorten heat-up time and improve thermal recovery, but the hotend and entire electrical path must be verified as suitable before it can be used safely.
Technical specifications
..
3.50€
Ex Tax:2.89€
Out of Stock
Stock: Out of Stock
Model: IR-Module
The Mini IR module is a non-contact optical probe designed to measure the position of a 3D printer build surface. Its compact 24 × 18mm circuit board makes it suitable for toolheads with limited space, including custom Cartesian, CoreXY and delta machines.
This revision uses a differential optica..
20.99€
Ex Tax:17.35€
Only a few units in stock
-11 %
Stock: In Stock
Model: Energetic-base-241x254
241 × 254 mm Flexible Steel Sheet with PEI on Both Sides
Flexible spring-steel sheet with PEI/Ultem coating on both sides, designed for magnetic beds with a nominal 241 × 254 mm surface. Flexing the steel after cooling helps remove printed parts.
Nominal size: 241 × 254 mm.Base material: flexible ..
45.00€ 39.99€
Ex Tax:33.05€
-14 %
Stock: In Stock
Model: 2510-12V
This 12 V 2510 brushless cooling fan provides efficient airflow in compact spaces. Measuring just 25 × 25 × 10 mm, it is ideal for cooling hotends, electronics, drivers, Raspberry Pi boards and other equipment where installation space is limited.
Features
Brushless DC cooling fan.
C..
3.00€ 2.59€
Ex Tax:2.14€