Stock: In Stock
Model: 16AWG-negro-1m
Black 16 AWG flexible electrical wire made with a stranded tinned-copper conductor and silicone insulation. It is supplied in a 1-metre length for making custom wiring in 3D printers, CNC machines, electronics, robotics and DC systems.
Its flexible construction simplifies routing inside electroni..
0.80€
Ex Tax:0.66€
Stock: In Stock
Model: Cable-16AWG-50cm-01
Pair of flexible 16 AWG wires, one red and one black, prepared for connecting a heated bed to a 3D printer controller board. Each conductor is approximately 50cm long and has a pre-insulated pin terminal fitted to one end for connection to a compatible terminal block.
The wires use stranded tinne..
2.25€
Ex Tax:1.86€
Stock: In Stock
Model: 16AWG-rojo-1m
Red 16 AWG flexible electrical wire with a stranded tinned-copper conductor and silicone insulation. It is supplied in a 1-metre length for making custom wiring in 3D printers, CNC machines, electronics, robotics and DC systems.
Its flexibility simplifies installation inside electronics enclosure..
0.80€
Ex Tax:0.66€
Stock: In Stock
Model: Boquilla-0.4-E5-7
A Brass nozzle with a 0.4mm outlet, nominal M6 thread and 16.8mm overall length. Its geometry matches the long nozzle originally used on the Creality Ender-5 S1, Ender-7 and Ender-3 V3 SE.
The 0.4mm diameter provides a practical balance of detail, flow and ease of tuning for general printing with..
1.30€
Ex Tax:1.07€
Stock: In Stock
Model: HEVO-Perfiles Aluminio
Set of 18 cut aluminium extrusions for building a dual-Z HyperCube Evolution frame with an approximate 300 × 300 × 300 mm print volume. It combines 3030 extrusions for the main frame and 2020 extrusions for the bed platform, following the cut list for the project's dual-Z variant.
Only the extrus..
53.00€
Ex Tax:43.80€
-17 %
Stock: In Stock
Model: Cable Bipolar - 1mm2
Flexible twin wire made from two parallel conductors, each with a nominal cross-sectional area of 1mm². Its transparent insulation leaves the conductors visible, while a longitudinal red stripe identifies one side throughout the cable.
It is sold by the metre and can be supplied as a single conti..
0.59€ 0.49€
Ex Tax:0.41€
Stock: In Stock
Model: Dual-fan-cable
Y-splitter cable designed to connect two two-wire fans to a single output. It distributes the power received through the input connector to two parallel branches, simplifying the wiring of dual-fan cooling systems.
It is useful in 3D printers, CNC machines and electronics enclosures fitted with t..
0.49€
Ex Tax:0.41€
Out of Stock
Stock: Out of Stock
Model: Conector Esquina-2 1515
Two-way corner connector designed to join two 15 series aluminium profiles at a 90° angle. Its compact design secures the profiles through their ends without occupying the external slots with a conventional bracket.
The oval opening provides access to the inside of the connector for inserting and..
1.75€
Ex Tax:1.45€
Stock: In Stock
Model: Conector Esquina-2 2020
Two-way corner connector designed to join two 20 series aluminium profiles at a 90° angle. Its compact shape creates the connection through the profile ends without requiring an external bracket over the slots.
The oval opening provides access to the inside of the connector for inserting and tigh..
1.75€
Ex Tax:1.45€
Stock: In Stock
Model: GT2-20T-ID5
Machined from aluminium, this 20-tooth GT2 pulley is designed to provide accurate and reliable power transmission in belt-driven motion systems. It is intended for use with 6 mm wide GT2 timing belts, making it a common choice for FDM 3D printers, CNC machines and other precision positioning equipme..
0.75€
Ex Tax:0.62€
-53 %
Stock: In Stock
Model: 2004 LCD
Description
The 2004 LCD Smart Controller allows a 3D printer to be operated without a permanent computer connection. It features a 20×4 character LCD display, an integrated SD card reader and a rotary encoder for menu navigation.
When supported by the firmware, print jobs can be selected and ..
18.99€ 8.99€
Ex Tax:7.43€
Stock: In Stock
Model: 2020-Profile-1m
Description
Anodised aluminium structural profile with a 20 × 20 mm cross-section and a length of 1 metre. This size is widely used for 3D printers, small CNC machines, laser engravers, enclosures and automation systems.
Four open sides allow brackets, nuts, plates and other accessories to be posi..
8.40€
Ex Tax:6.94€