Stock: In Stock
Model: Kapton15mm
Made from polyimide with a silicone adhesive, this 15 mm BGA Kapton tape is designed to provide electrical insulation and thermal protection in high-temperature applications. It is widely used in 3D printing, electronics assembly and soldering or rework operations.
With a maximum operating temper..
2.10€
Ex Tax:1.74€
Out of Stock
Stock: Out of Stock
Model: 1515-Profile-1m
Description
Anodised aluminium structural profile with a nominal 15 × 15 mm cross-section and a length of 1 metre. Its compact size makes it suitable for lightweight 3D-printer frames, small mechanisms, enclosures and automation projects.
Four open sides allow compatible nuts, brackets and connect..
3.99€
Ex Tax:3.30€
Stock: In Stock
Model: 16AWG-negro-1m
Black 16 AWG flexible electrical wire made with a stranded tinned-copper conductor and silicone insulation. It is supplied in a 1-metre length for making custom wiring in 3D printers, CNC machines, electronics, robotics and DC systems.
Its flexible construction simplifies routing inside electroni..
0.80€
Ex Tax:0.66€
Stock: In Stock
Model: Cable-16AWG-50cm-01
Pair of flexible 16 AWG wires, one red and one black, prepared for connecting a heated bed to a 3D printer controller board. Each conductor is approximately 50cm long and has a pre-insulated pin terminal fitted to one end for connection to a compatible terminal block.
The wires use stranded tinne..
2.25€
Ex Tax:1.86€
Stock: In Stock
Model: 16AWG-rojo-1m
Red 16 AWG flexible electrical wire with a stranded tinned-copper conductor and silicone insulation. It is supplied in a 1-metre length for making custom wiring in 3D printers, CNC machines, electronics, robotics and DC systems.
Its flexibility simplifies installation inside electronics enclosure..
0.80€
Ex Tax:0.66€
Stock: In Stock
Model: Boquilla-0.4-E5-7
A Brass nozzle with a 0.4mm outlet, nominal M6 thread and 16.8mm overall length. Its geometry matches the long nozzle originally used on the Creality Ender-5 S1, Ender-7 and Ender-3 V3 SE.
The 0.4mm diameter provides a practical balance of detail, flow and ease of tuning for general printing with..
1.30€
Ex Tax:1.07€
Stock: In Stock
Model: HEVO-Perfiles Aluminio
Set of 18 cut aluminium extrusions for building a dual-Z HyperCube Evolution frame with an approximate 300 × 300 × 300 mm print volume. It combines 3030 extrusions for the main frame and 2020 extrusions for the bed platform, following the cut list for the project's dual-Z variant.
Only the extrus..
53.00€
Ex Tax:43.80€
-17 %
Stock: In Stock
Model: Cable Bipolar - 1mm2
Flexible twin wire made from two parallel conductors, each with a nominal cross-sectional area of 1mm². Its transparent insulation leaves the conductors visible, while a longitudinal red stripe identifies one side throughout the cable.
It is sold by the metre and can be supplied as a single conti..
0.59€ 0.49€
Ex Tax:0.41€
New
Stock: In Stock
Model: Dual-fan-cable
Y-splitter cable designed to connect two two-wire fans to a single output. It distributes the power received through the input connector to two parallel branches, simplifying the wiring of dual-fan cooling systems.
It is useful in 3D printers, CNC machines and electronics enclosures fitted with t..
0.49€
Ex Tax:0.41€
New
Stock: In Stock
Model: Conector Esquina-2 1515
Two-way corner connector designed to join two 15 series aluminium profiles at a 90° angle. Its compact design secures the profiles through their ends without occupying the external slots with a conventional bracket.
The oval opening provides access to the inside of the connector for inserting and..
1.75€
Ex Tax:1.45€
Stock: In Stock
Model: Conector Esquina-2 2020
Two-way corner connector designed to join two 20 series aluminium profiles at a 90° angle. Its compact shape creates the connection through the profile ends without requiring an external bracket over the slots.
The oval opening provides access to the inside of the connector for inserting and tigh..
1.75€
Ex Tax:1.45€
Stock: In Stock
Model: GT2-20T-ID5
Machined from aluminium, this 20-tooth GT2 pulley is designed to provide accurate and reliable power transmission in belt-driven motion systems. It is intended for use with 6 mm wide GT2 timing belts, making it a common choice for FDM 3D printers, CNC machines and other precision positioning equipme..
0.75€
Ex Tax:0.62€