Out of Stock
Stock: Out of Stock
Model: Resistencia 24V 70W
24 V, 70 W heater cartridge for hotend blocks with a cylindrical Ø6 mm bore. This high-power variant is intended for systems that can both use and safely handle it: before replacing a 40 or 60 W heater, check the controller output, power supply, terminals, wiring, sensor, block and thermal configura..
3.50€
Ex Tax:2.89€
Out of Stock
Stock: Out of Stock
Model: Resistencia 24V 80W
24 V, 80 W heater cartridge for hotend blocks with a cylindrical Ø6 mm bore. Its high power may shorten heat-up time and improve thermal recovery, but the hotend and entire electrical path must be verified as suitable before it can be used safely.
Technical specifications
..
3.50€
Ex Tax:2.89€
Out of Stock
Stock: Out of Stock
Model: Cable-3DTouch-2m
Two-metre cable for connecting a 3DTouch automatic bed-levelling sensor to a 3D printer controller board. It is useful for larger machines or for routing the probe wiring neatly through the toolhead, drag chain and frame to the electronics enclosure.
The sensor end has a white 5-position connecto..
3.15€
Ex Tax:2.60€
Stock: In Stock
Model: Termistor100K ohm NTC 3950-PT100-3mm-Dupont
100K NTC Beta 3950 hotend thermistor protected by a 3 mm cylindrical 304 stainless-steel capsule. The encapsulation provides a more robust installation than an exposed bead thermistor and fits heater blocks designed for sensors of this diameter.
Features
Type: 100K NTC Beta 3950 thermistor.
304..
0.85€
Ex Tax:0.70€
Stock: In Stock
Model: Termistor100K-PT100-3mm-XH
100K NTC Beta 3950 hotend thermistor with a 3 mm cylindrical 304 stainless-steel capsule, 1 metre cable and XH connector. Its encapsulated construction provides a robust fit in heater blocks designed for cylindrical temperature sensors.
Features
100K NTC Beta 3950 thermistor.
304 stainless-stee..
0.85€
Ex Tax:0.70€
Stock: In Stock
Model: Kapton30mm
Kapton-type polyimide adhesive tape measuring 30mm wide and 33 metres long. It provides electrical insulation, thermal protection and masking for 3D printing, electronics, soldering and BGA or SMD rework.
It is made from polyimide film with a silicone adhesive and has a specified heat resistance ..
2.99€
Ex Tax:2.47€
Stock: In Stock
Model: CableMotor-DuPont-0.5m
Description
Short four-conductor cable for connecting a stepper motor to a controller board or driver through DuPont-type terminals. It has a 2.0 mm pitch PH-type connector on the motor end.
Its 0.5 metre length is suitable for compact assemblies, test benches and machines where the motor is locat..
0.69€
Ex Tax:0.57€
Stock: In Stock
Model: CableMotor-DuPont-1m
Description
Four-conductor cable for connecting a stepper motor to electronics through a DuPont-type connection. It has a 2.0 mm pitch PH-type connector for the motor and a DuPont connection on the controller or driver end.
The 1 metre length is suitable for 3D printers, prototypes, test benches a..
0.79€
Ex Tax:0.65€
Out of Stock
Stock: Out of Stock
Model: CableMotor-XH2.54-0.5m
Description
Short four-conductor cable for connecting a stepper motor to a controller board or driver. It has a 2.0 mm pitch PH-type connector for the motor and a four-position XH-type connector for the electronics.
The 0.5 metre length is suitable when the motor is located close to the controller..
0.69€
Ex Tax:0.57€
Stock: In Stock
Model: CableMotor-XH2.54-1m
Description
Four-conductor cable for connecting a stepper motor to a controller board or driver. It has a 2.0 mm pitch PH-type connector on the motor end and a four-position XH-type connector on the electronics end.
Its 1 metre length is suitable for many 3D printers, small CNC machines, laser eng..
0.79€
Ex Tax:0.65€
Out of Stock
Stock: Out of Stock
Model: CableMotor-XH2.54-2m
Description
Two-metre four-conductor cable for connecting a stepper motor to a controller board or driver. It has a 2.0 mm pitch PH-type connector on the motor end and a four-position XH-type connector on the electronics end.
Its length makes it suitable for large-format 3D printers, CNC machines,..
0.99€
Ex Tax:0.82€
Stock: In Stock
Model: Kapton5mm
Kapton-type polyimide adhesive tape measuring 5mm wide and 33 metres long. Its narrow format is suitable for insulating, masking and securing small components in 3D printers, electronics and BGA or SMD soldering and rework applications.
It combines an electrically insulating polyimide film with a..
1.20€
Ex Tax:0.99€