Stock: In Stock
Model: Dupont3PF
Three-way Dupont cable with female connectors at both ends and an approximate length of 70 cm. It connects boards, sensors and modules fitted with male pins compatible with the nominal 2.54 mm Dupont format.
Features
Number of positions: 3.
Connectors: female to female.
Nominal pitch: 2.54 m..
0.65€
Ex Tax:0.54€
Stock: In Stock
Model: Dupont3P-MF
Three-way Dupont cable with one male and one female end, suitable for extending signal connections between electronic modules, sensors and boards using contacts compatible with the nominal 2.54 mm Dupont format.
Features
Number of positions: 3.
Connectors: male to female.
Nominal pitch: 2.54..
0.60€
Ex Tax:0.50€
Stock: In Stock
Model: Dupont4PF
The 4-pin female-to-female Dupont cable is a practical solution for connecting electronic modules, development boards and other devices using standard 2.54 mm Dupont connectors. Its approximate length of 70 cm makes cable routing easier in electronics, 3D printing and automation projects.
Feature..
0.79€
Ex Tax:0.65€
Stock: In Stock
Model: Dupont4P-MF
Four-way Dupont cable with a male connector at one end and a female connector at the other. Its approximate 70 cm length can be used to extend signal connections between electronic boards, modules and devices using contacts compatible with the nominal 2.54 mm Dupont format.
Features
Number of ..
0.75€
Ex Tax:0.62€
Out of Stock
Stock: Out of Stock
Model: CadenaPortacables10x10
Nylon cable drag chain for organising, guiding and protecting wiring on moving axes in 3D printers, CNC machines and automated equipment. It has a nominal internal cross-section of 10 × 10mm and an approximate length of 1 metre.
This version offers more capacity than the 7 × 7mm size while retain..
6.65€
Ex Tax:5.50€
Out of Stock
Stock: Out of Stock
Model: LCD-Cable-50cm
A 50 cm flat ribbon cable with ten conductors and 2 × 5 female IDC connectors, intended to connect RepRap LCD displays to controller boards or adapters that use matching EXP1 or EXP2 ports.
The flexible 28 AWG AWM 2651 ribbon keeps display wiring organised. Its red stripe identifies conductor 1 a..
0.99€
Ex Tax:0.82€
Out of Stock
Stock: Out of Stock
Model: Resistencia 24V 70W
24 V, 70 W heater cartridge for hotend blocks with a cylindrical Ø6 mm bore. This high-power variant is intended for systems that can both use and safely handle it: before replacing a 40 or 60 W heater, check the controller output, power supply, terminals, wiring, sensor, block and thermal configura..
3.50€
Ex Tax:2.89€
Out of Stock
Stock: Out of Stock
Model: Resistencia 24V 80W
24 V, 80 W heater cartridge for hotend blocks with a cylindrical Ø6 mm bore. Its high power may shorten heat-up time and improve thermal recovery, but the hotend and entire electrical path must be verified as suitable before it can be used safely.
Technical specifications
..
3.50€
Ex Tax:2.89€
Out of Stock
Stock: Out of Stock
Model: Cable-3DTouch-2m
Two-metre cable for connecting a 3DTouch automatic bed-levelling sensor to a 3D printer controller board. It is useful for larger machines or for routing the probe wiring neatly through the toolhead, drag chain and frame to the electronics enclosure.
The sensor end has a white 5-position connecto..
3.15€
Ex Tax:2.60€
Out of Stock
Stock: Out of Stock
Model: CableMotor-XH2.54-0.5m
Description
Short four-conductor cable for connecting a stepper motor to a controller board or driver. It has a 2.0 mm pitch PH-type connector for the motor and a four-position XH-type connector for the electronics.
The 0.5 metre length is suitable when the motor is located close to the controller..
0.69€
Ex Tax:0.57€
Out of Stock
Stock: Out of Stock
Model: CableMotor-XH2.54-2m
Description
Two-metre four-conductor cable for connecting a stepper motor to a controller board or driver. It has a 2.0 mm pitch PH-type connector on the motor end and a four-position XH-type connector on the electronics end.
Its length makes it suitable for large-format 3D printers, CNC machines,..
0.99€
Ex Tax:0.82€
Out of Stock
Stock: Out of Stock
Model: CadenaPortacables7x7
Nylon cable drag chain for guiding and protecting flexible wiring during repeated movement in 3D printers, CNC machines, robots and automation equipment. This compact version has a nominal internal cross-section of 7 × 7mm and an approximate length of 1 metre.
Its small size is suitable for insta..
3.25€
Ex Tax:2.69€