Stock: In Stock
Model: Resistencia 12V 50W
12 V, 50 W cylindrical heater cartridge for hotend blocks with a nominal 6 mm heater bore. It is intended for 12 V machines whose electronics, wiring and power supply can safely control its approximate 4.17 A current draw.
Compared with a 12 V, 40 W heater, this cartridge provides more power but ..
1.75€
Ex Tax:1.45€
Stock: In Stock
Model: Kapton15mm
Made from polyimide with a silicone adhesive, this 15 mm BGA Kapton tape is designed to provide electrical insulation and thermal protection in high-temperature applications. It is widely used in 3D printing, electronics assembly and soldering or rework operations.
With a maximum operating temper..
2.10€
Ex Tax:1.74€
Stock: In Stock
Model: 16AWG-negro-1m
Black 16 AWG flexible electrical wire made with a stranded tinned-copper conductor and silicone insulation. It is supplied in a 1-metre length for making custom wiring in 3D printers, CNC machines, electronics, robotics and DC systems.
Its flexible construction simplifies routing inside electroni..
0.80€
Ex Tax:0.66€
Stock: In Stock
Model: Cable-16AWG-50cm-01
Pair of flexible 16 AWG wires, one red and one black, prepared for connecting a heated bed to a 3D printer controller board. Each conductor is approximately 50cm long and has a pre-insulated pin terminal fitted to one end for connection to a compatible terminal block.
The wires use stranded tinne..
2.25€
Ex Tax:1.86€
Stock: In Stock
Model: 16AWG-rojo-1m
Red 16 AWG flexible electrical wire with a stranded tinned-copper conductor and silicone insulation. It is supplied in a 1-metre length for making custom wiring in 3D printers, CNC machines, electronics, robotics and DC systems.
Its flexibility simplifies installation inside electronics enclosure..
0.80€
Ex Tax:0.66€
-17 %
Stock: In Stock
Model: Cable Bipolar - 1mm2
Flexible twin wire made from two parallel conductors, each with a nominal cross-sectional area of 1mm². Its transparent insulation leaves the conductors visible, while a longitudinal red stripe identifies one side throughout the cable.
It is sold by the metre and can be supplied as a single conti..
0.59€ 0.49€
Ex Tax:0.41€
New
Stock: In Stock
Model: Dual-fan-cable
Y-splitter cable designed to connect two two-wire fans to a single output. It distributes the power received through the input connector to two parallel branches, simplifying the wiring of dual-fan cooling systems.
It is useful in 3D printers, CNC machines and electronics enclosures fitted with t..
0.49€
Ex Tax:0.41€
Stock: In Stock
Model: Kapton20mm
Kapton-type polyimide adhesive tape measuring 20mm wide and 33 metres long. It is designed to provide electrical insulation, masking and thermal protection during electronics, 3D printing, soldering and BGA or SMD component-rework tasks.
Its polyimide film and silicone adhesive withstand temperat..
2.75€
Ex Tax:2.27€
Stock: In Stock
Model: Resistencia-ceramica-Rapido2F
Replacement ceramic heating element for the Phaetus RAPIDO 2F hotend. It operates at 24 V with a nominal power of 115 W and is intended to replace the original heater during repair or maintenance.
Main features
Rated voltage: 24 V.
Rated power: 115 W.
Ceramic heating element.
1 metre silico..
10.25€
Ex Tax:8.47€
Stock: In Stock
Model: Resistencia 24V 40W
24 V, 40 W cylindrical heater cartridge for hotend blocks with a nominal 6 mm heater bore. This configuration is widely used in 24 V V6-style hotends and is suitable as a replacement when dimensions, voltage, power, cable length and electrical connection all match.
The cartridge has a metal sheat..
0.95€
Ex Tax:0.79€
Stock: In Stock
Model: Resistencia 24V 50W
24 V, 50 W cylindrical heater cartridge for hotend blocks with a nominal 6 mm heater bore. Its power rating is suitable for extrusion systems designed or properly adapted to control a 50 W load.
It can be used as a replacement or for a custom hotend assembly, but it must not be treated as a direc..
1.75€
Ex Tax:1.45€
Stock: In Stock
Model: Resistencia 24V 60W
24 V, 60 W heater cartridge for hotend blocks with a cylindrical Ø6 mm bore. Its 6 × 20 mm body and 1 metre cable make it suitable as a replacement or for custom assemblies that are mechanically, electrically and thermally designed for this power level.
Compared with a common lower-power cartridg..
3.50€
Ex Tax:2.89€