Only a few units in stock
-9 %
Stock: In Stock
Model: Filaflex-Purifier
Recreus Filaflex Purifier is a flexible polyether TPU filament rated at 82 Shore A, combining Filaflex elasticity with Pure.tech mineral technology. Recreus states that the formulation adsorbs CO₂, nitrogen oxides (NOx) and volatile organic compounds (VOCs) that contact the surface, transforming the..
44.90€ 40.99€
Ex Tax:33.88€
Only a few units in stock
-12 %
Stock: In Stock
Model: Filaflex-SEBS
Recreus Filaflex SEBS 90A is a Spanish-made 1.75 mm flexible filament based on a SEBS TPE (styrene-ethylene-butylene-styrene). It combines a soft feel with good elastic recovery and a nominal Shore 90A hardness, making it easier to feed than ultra-soft Filaflex grades while still producing flexible ..
33.90€ 29.99€
Ex Tax:24.79€
Only a few units in stock
-5 %
Stock: In Stock
Model: Recreus-PETG-G CF
Recreus PET-G CF is a 1.75 mm technical filament based on PET-G and reinforced with 10% carbon fibre. It combines the dimensional ease of PET-G with high stiffness, reduced warping and a matte black finish suited to functional parts, tooling, brackets, housings and technical prototypes.
Developed..
47.50€ 44.99€
Ex Tax:37.18€
Only a few units in stock
-7 %
Stock: In Stock
Model: Recreus-PLA-LW
Recreus PLA-LW black 1.75 mm — lightweight foaming PLA — 750 g
Recreus PLA-LW is a PLA filament with active foaming technology, developed and manufactured in Spain for printing large-volume parts at a lower density. Once the material is heated above its activation point, it expands inside the ext..
39.90€ 36.99€
Ex Tax:30.57€
Only a few units in stock
-21 %
Stock: In Stock
Model: PP3D-Recreus
Recreus PP·3D Natural is a 1.75 mm polypropylene filament for functional parts requiring low density, fatigue resistance, toughness and low friction. Its flexible, cyclically durable behaviour is particularly useful for living hinges, closures, containers and mechanical components.The spool contains..
49.90€ 39.50€
Ex Tax:32.64€
Stock: In Stock
Model: PPGF-Recreus
Recreus PP·GF is an engineering filament made from polypropylene reinforced with 15% glass fibre, developed by Recreus in collaboration with Repsol. It combines PP's low density and chemical resistance with markedly higher stiffness, a matte finish and good stability for functional parts.
This pack..
47.80€
Ex Tax:39.50€
-22 %
Stock: In Stock
Model: HIPS-Sakata-1.75mm
Sakata 3D HIPS filament in 1.75 mm, supplied on a 1 kg spool and available in white or black. High-impact polystyrene combines rigidity, dimensional stability and impact resistance, making it suitable for functional parts, housings, prototypes and tooling.
It can also be used as a limonene-solubl..
19.99€ 15.50€
Ex Tax:12.81€
-250x250.webp "Sakata 3D OBC black filament 1.75 mm - polyethylene copolymer - 750 g")
Only a few units in stock
-11 %
Stock: In Stock
Model: OBC-1.75mm-SAKATA3D
Sakata 3D OBC is a technical polyethylene copolymer filament for FDM/FFF 3D printing. It combines low density, flexibility, impact resistance and strong interlayer bonding, making it particularly useful for lightweight parts, living hinges, containers and components that need to deform without behav..
89.95€ 79.95€
Ex Tax:66.07€
Only a few units in stock
-45 %
Stock: In Stock
Model: PA-CF15-1.75mm-SAKATA3D
Sakata 3D PA-CF15 is a technical filament manufactured in Spain from a heat-stabilised copolyamide (Nylon) reinforced with 15% carbon fibre. The formulation is intended for functional parts requiring high stiffness, good mechanical properties, low shrinkage and reduced weight.
It is supplied on a..
99.95€ 55.00€
Ex Tax:45.45€
-24 %
Out of Stock
Stock: Out of Stock
Model: PA-GF20-FR-1.75mm-SAKATA3D
Sakata 3D PA-GF20-FR is a technical filament made in Spain from a heat-stabilised copolyamide or Nylon reinforced with 20% glass fibre and formulated with a flame-retardant additive. It is intended for functional parts, tooling, supports and housings requiring dimensional stability, stiffness and do..
45.90€ 34.90€
Ex Tax:28.84€
Only a few units in stock
-10 %
Stock: In Stock
Model: PA-NT-1.75mm-SAKATA3D
Sakata 3D PA-NT is a technical unreinforced copolyamide or Nylon filament developed for FDM/FFF 3D printing and manufactured in Spain. It combines stiffness when dry with greater deformation capacity and impact resistance after conditioning, making it suitable for gears, clips, housings, brackets an..
29.99€ 26.95€
Ex Tax:22.27€
Stock: In Stock
Model: Easy-OFF-1.75mm-SAKATA3D
Sakata 3D PLA 450 Easy Off is a breakaway support filament for dual-material 3D printing. It is made from NatureWorks Ingeo 3D450 PLA and is designed to support overhangs, cavities and complex geometry during printing, while providing useful interface adhesion and easier mechanical removal afterward..
17.90€
Ex Tax:14.79€