- Stock: 9
- Model: X-920 1.75mm SAKATA3D-RE
Type:
FLEX X-920
FLEX X-920 Transition
FLEX X-920 Recycled
RE FLEX 85A
Sakata 3D RE-FleX-920 is made from material recovered during Sakata's own filament manufacturing process. It retains the flexible character of the FleX-920 family and is supplied as a 1 kg, 1.75 mm spool whose colour varies by batch.
It is particularly useful for prototypes, models, cosplay, protectors, bumpers, grips and functional parts where flexibility and material recovery matter more than reproducing an exact colour.
Batch-dependent colour
The colour depends on the material available in each recovery cycle and cannot be selected or guaranteed. Two spools may have different shades, including within the same order. The image identifies the product type but is not a commitment to the colour supplied.
Projects requiring repeatable colour, matching replacements or a corporate shade should use standard Sakata 3D FleX-920 with selectable colour.
Features
- Brand: Sakata 3D Filaments.
- Family: RE-FleX-920.
- Material source: material recovered during filament manufacture; it is not presented as post-consumer waste.
- Manufactured in: Spain.
- Diameter: 1.75 mm.
- Net weight: 1 kg.
- Colour: varies by batch.
- FleX-920 family hardness reference: 89 Shore A.
Sakata states that its RE filaments have mechanical and thermal properties similar to versions made from virgin raw materials. Because the material is recovered and the colour varies, settings and finish should be validated with the received spool whenever repeatability is important.
Printing guide
| Setting | Starting point |
|---|---|
| Nozzle | 220-245 °C |
| Bed | Around 40 °C; adjust for actual surface and adhesion |
| Initial speed | Start within 10-50 mm/s and increase only after verifying reliable feeding |
| Reference surface | Glass or PEI |
| Part cooling | 100% as a FleX-920 reference |
| Optional drying | 2-4 hours at 60 °C |
Use a closely constrained filament path, limited retraction and enough extruder pressure to grip without excessively deforming the filament. Direct-drive or short paths are generally easier; Bowden configurations must prevent the material from buckling between the drive gear and tube.
Compatibility
Suitable for 1.75 mm FDM/FFF printers that can reach the stated temperature range and feed flexible material. Compatibility with automatic loaders, AMS units or multi-material systems must be checked in the printer documentation. If the manufacturer excludes flexible filament, use external feeding or the machine's recommended method.
Other versions in the family
Choose standard FleX-920 when a specific colour is required. For a spool containing one or more random production colour changes, see FleX-920 Transition.
