Stock: In Stock
Model: 3Dtouch
Simple, light and reliable automatic leveling system.New version, with non-metallic probe and longer travel.Accuracy close to 0.005mm.Includes the classic short cable, an extension cable, connectors and springs.
1 Piece..
13.99€
Ex Tax:11.56€
Stock: In Stock
Model: Brass-V6-Heater-Block-PT100
This material is more resistant and has a higher thermal inertia, so we can tighten the nozzle more without passing the thread, and having a higher thermal inertia the temperature will remain much more stable during printing.The v6 Heater Block has been upgraded to clamp both the
heater cartridge a..
4.99€
Ex Tax:4.12€
Stock: In Stock
Model: CHC-Bloquecalefactor-24V
CHC series heating block, ceramic and silver-plated copper, which guarantees precise and uniform heating.Compatible with multiple hotends and extruders, such as V5, V6, CR10, Hemera, Matrix etc.Ceramic block, resistant to high temperatures (up to 300ºC).104NT-4 thermistor, TJC8A-M-2P connector. Cabl..
20.59€
Ex Tax:17.02€
Stock: Out of Stock
Model: Dragon-Hotend-HF
This hotend designed and manufactured by Trianglelab is comparable to a hybrid between the E3D V6 hotend and the Mosquito hotend:It has the format of the E3D v6 hotend, so it is compatible with all printers and adapters designed for this hotend.It includes a bimetal throat with the same thermal prin..
79.00€
Ex Tax:65.29€
Stock: In Stock
Model: Dragon-Hotend-SF
This hotend designed and manufactured by Trianglelab is comparable to a hybrid between the E3D V6 hotend and the Mosquito hotend:It has the format of the E3D v6 hotend, so it is compatible with all printers and adapters designed for this hotend.It includes a bimetal throat with the same thermal prin..
75.00€
Ex Tax:61.98€
Stock: In Stock
Model: Orbiter-V2-sensors
Set of parts for the filament sensor for the Orbiter V2 extruder.Characteristics:Filament detectionAutomatic filament loadingFilament unload buttonThe filament entry ring is printed on a transparent material so that it is illuminated by a bi-color LED to show the status as follows:Red - no filament ..
23.50€
Ex Tax:19.42€
Stock: In Stock
Model: Nozzle-1.75 hardened steel-0.4
Stainless steel nozzles are suitable for abrasive materials that wear out normal nozzles.These nozzles perform the function of extrusion of melted plastic in 3D printing process. They are compatible with our hotends and popular V5, V6 and its variations. Material: Hardened steelDiameter: 0..
7.00€
Ex Tax:5.79€
Stock: In Stock
Model: Nozzle-1.75 hardened steel-0.5
Stainless steel nozzles are suitable for abrasive materials that wear out normal nozzles.These nozzles perform the function of extrusion of melted plastic in 3D printing process. They are compatible with our hotends and popular V5, V6 and its variations. Material: Hardened steelDiameter: 0..
7.00€
Ex Tax:5.79€
Stock: In Stock
Model: Nozzle-1.75 hardened steel-0.6
Stainless steel nozzles are suitable for abrasive materials that wear out normal nozzles.These nozzles perform the function of extrusion of melted plastic in 3D printing process. They are compatible with our hotends and popular V5, V6 and its variations. Material: Hardened steelDiameter: 0..
7.00€
Ex Tax:5.79€
Stock: In Stock
Model: Nozzle-T-V6 1.75-0.3
High quality and precision nozzle for V6 type fusers.Special features:Output tolerance: ±0.01mmConcentricity: 0.02Roughness: <= Ra 0.8High quality materialHigh precision productionStrict quality controlsThese nozzles perform the function of extrusion of melted plastic in 3D printing process. ..
2.99€
Ex Tax:2.47€
Stock: In Stock
Model: Nozzle-T-V6 1.75-0.4
High quality and precision nozzle for V6 type fusers.Special features:Output tolerance: ±0.01mmConcentricity: 0.02Roughness: <= Ra 0.8High quality materialHigh precision productionStrict quality controlsThese nozzles perform the function of extrusion of melted plastic in 3D printing process. ..
2.99€
Ex Tax:2.47€
Stock: In Stock
Model: Nozzle-T-V6 1.75-0.5
High quality and precision nozzle for V6 type fusers.Special features:Output tolerance: ±0.01mmConcentricity: 0.02Roughness: <= Ra 0.8High quality materialHigh precision productionStrict quality controlsThese nozzles perform the function of extrusion of melted plastic in 3D printing process. ..
2.99€
Ex Tax:2.47€